Technická data
Název:
SIPLUS LOGO! DM16 24R V8
Popis:
SIPLUS LOGO! DM16 24R -40 ... +70 DEGREES C STARTUP -25 DEGREES C MIT CONFORMAL COATING BASED ON 6ED1055-1NB10-0BA2 . EXP. MODULE, PU/I/O: 24V DC/24V DC/RELAY, 8 DI/8 DO, 4TE FOR LOGO! 8
Technické informace:
| Installation type/mounting | ||
| Mounting | on 35 mm DIN rail, 4 spacing units wide | |
| Supply voltage | ||
| Rated value (DC) | ||
| ● 24 V DC | Yes | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Rated value (AC) | ||
| ● 24 V AC | No | |
| Digital inputs | ||
| Number of digital inputs | 8 | |
| Input voltage | ||
| ● Type of input voltage | DC | |
| ● for signal "0" | < 5 V DC | |
| ● for signal "1" | > 12 V DC | |
| Input current | ||
| ● for signal "0", max. (permissible quiescent current) | 0.85 mA | |
| ● for signal "1", typ. | 3.5 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — at "0" to "1", max. | 1.5 ms | |
| — at "1" to "0", max. | 1.5 ms | |
| Digital outputs | ||
| Number of digital outputs | 8; Relays | |
| Short-circuit protection | No | |
| Controlling a digital input | Yes | |
| Switching capacity of the outputs | ||
| ● on lamp load, max. | 1 000 W | |
| Output current | ||
| ● for signal "1" rated value | 5 A | |
| ● for signal "1" minimum load current | 100 mA | |
| Parallel switching of two outputs | ||
| ● for uprating | No | |
| Switching frequency | ||
| ● with resistive load, max. | 2 Hz | |
| ● with inductive load, max. | 0.5 Hz | |
| ● mechanical, max. | 10 Hz | |
| Relay outputs | ||
| Switching capacity of contacts | ||
| — with inductive load, max. | 3 A | |
| — with resistive load, max. | 5 A | |
| EMC | ||
| Emission of radio interference acc. to EN 55 011 | ||
| ● Limit class B, for use in residential areas | Yes | |
| Degree and class of protection | ||
| Degree of protection acc. to EN 60529 | ||
| ● IP20 | Yes | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| developed in accordance with IEC 61131 | Yes | |
| according to VDE 0631 | Yes | |
| Marine approval | ||
| ● Marine approval | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● max. | 70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● At cold restart, min. | -25 °C | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Dimensions | ||
| Width | 71.5 mm | |
| Height | 90 mm | |
| Depth | 58 mm | |
| last modified: | 02/01/2017 | |
