Technická data
Název:
SIPLUS HMI KP8 DESIGN LEERFRONT
Popis:
SIPLUS HMI DESIGN BLANK FRONT KP8 FORMAT -25 ... +60 DEGREE WITH CONFORMAL COATING BASED ON 6AV3688-3XY38-3AX0 . DESIGN BLANK FRONT KP8 FORMAT APPEARANCE FOR EASY MOUNTING OF STANDARD 22.5 MM ELEMENTS IDEAL FOR MODULAR OPERATING PANELS ALSO OPTIMIZED FOR MOUNTING IN EXTENTION UNITS FOR PRO DEVICES
Technické informace:
General information | ||
Product type designation | SIMATIC HMI design empty front | |
Control elements | ||
With parameterizable keys | No | |
Keyboard fonts | ||
● Function keys | ||
— Number of function keys | 0 | |
Installation type/mounting | ||
Mounting type | Clamp terminals | |
Mounting position | Any | |
Rack mounting possible | No | |
Front installation possible | Yes; Compatible with extension unit dimensions | |
Rail mounting possible | No | |
Wall mounting/direct mounting possible | No | |
Mounting in portrait format possible | Yes | |
Mounting in landscape format possible | Yes | |
maximum permissible angle of inclination without external ventilation | 180°; To the front/rear | |
Number of slots for command devices and signaling units | 5; Max. 5 possible | |
Supply voltage | ||
Type of supply voltage | external | |
Type of output | ||
LED colors | ||
● red | No | |
● yellow | No | |
● green | No | |
● white | No | |
● blue | No | |
Interfaces | ||
Number of USB interfaces | 0 | |
Test commissioning functions | ||
Key and signal lamp test | No | |
EMC | ||
Emission of radio interference acc. to EN 55 011 | ||
● Limit class A, for use in industrial areas | No | |
● Limit class B, for use in residential areas | No | |
Degree and class of protection | ||
IP (at the front) | IP65 | |
Enclosure Type 4 at the front | No | |
Enclosure Type 4x at the front | No | |
IP (rear) | IP20 | |
Standards, approvals, certificates | ||
CE mark | Yes | |
cULus | No | |
RCM (formerly C-TICK) | No | |
KC approval | No | |
Suitable for safety functions | Yes; e.g. installation of emergency stop | |
Marine approval | ||
● Germanischer Lloyd (GL) | No | |
● American Bureau of Shipping (ABS) | No | |
● Bureau Veritas (BV) | No | |
● Det Norske Veritas (DNV) | No | |
● Lloyds Register of Shipping (LRS) | No | |
● Nippon Kaiji Kyokai (Class NK) | No | |
● Polski Rejestr Statkow (PRS) | No | |
Use in hazardous areas | ||
● ATEX Zone 2 | No | |
● ATEX Zone 22 | No | |
● cULus Class I Zone 1 | No | |
● cULus Class I Zone 2, Division 2 | No | |
● FM Class I Division 2 | No | |
Ambient conditions | ||
Ambient temperature during operation | ||
● min. | -40 °C; = Tmin | |
● max. | 60 °C; = Tmax | |
● Operation (vertical installation) | ||
— For vertical installation, min. | -40 °C; = Tmin | |
— For vertical installation, max. | 60 °C; = Tmax | |
● Operation (max. tilt angle) | ||
— At maximum tilt angle, min. | -40 °C; = Tmin | |
— At maximum tilt angle, min. | 60 °C; = Tmax | |
● Operation (vertical installation, portrait format) | ||
— For vertical installation, min. | -40 °C; = Tmin | |
— For vertical installation, max. | 60 °C; = Tmax | |
● Operation (max. tilt angle, portrait format) | ||
— At maximum tilt angle, min. | -40 °C; = Tmin | |
— At maximum tilt angle, min. | 60 °C; = Tmax | |
Ambient temperature during storage/transportation | ||
● min. | -40 °C | |
● max. | 80 °C | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Mechanics/material | ||
Enclosure material (front) | ||
● Plastic | No | |
● Aluminum | Yes | |
● Stainless steel | No | |
Dimensions | ||
Width of the housing front | 98 mm | |
Height of housing front | 155 mm | |
Mounting cutout, width | 68 mm; Max. thickness of mounting plate 2 - 6 mm | |
Mounting cutout, height | 129 mm | |
Overall depth | 49 mm | |
Weights | ||
Weight without packaging | 240 g | |
last modified: | 02/01/2017 |