Technická data
Název:
SIPLUS NET OLM/G11 V4.0
Popis:
SIPLUS NET OLM/G11 V4.0 -25 ... +60 DEGREES C BASED ON 6GK1503-2CB00
Technické informace:
| Product type designation | SIPLUS NET OLM/G11 V4.0 | |
| Transmission rate | ||
| Transfer rate / with PROFIBUS | 9.6 kbit/s ... 12 Mbit/s | |
| Transfer rate / with PROFIBUS PA | 45.45 kbit/s | |
| Interfaces | ||
| Number of electrical/optical connections / for network components or terminal equipment / maximum | 2 | |
| Number of electrical connections | ||
| ● for network components or terminal equipment | 1 | |
| ● for signaling contact | 1 | |
| ● for redundant voltage supply | 1 | |
| Type of electrical connection | ||
| ● for network components or terminal equipment | 9-pin Sub-D socket | |
| ● for measuring device | 2-pole terminal block | |
| ● for power supply | - | |
| ● for power supply and signaling contact | 5-pole terminal block | |
| Number of optical interfaces / for fiber optic cable | 1 | |
| Design of the optical interface / for fiber optic cable | BFOC port | |
| Optical data | ||
| Damping ratio / of the FOC transmission link | ||
| ● for glass FOC with 50/125 µm / at 3 dB/km / maximum | 10 dB | |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum | 12 dB | |
| propagation delay [bit] | 6.5 bit | |
| Connectable optical power relative to 1 mW | ||
| ● for glass FOC with 50/125 µm / at 3 dB/km | -15 dB | |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km | -13 dB | |
| Optical sensitivity relating to 1 mW | ||
| ● for glass FOC with 50/125 µm / at 3 dB/km | -28 dB | |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km | -28 dB | |
| Wavelength | ||
| ● for glass FOC with 50/125 µm / compatible with interface / at 3 dB/km | 860 nm | |
| ● for glass FOC with 62.5/125 µm / compatible with interface / at 3.5 dB/km | 860 nm | |
| Wire length | ||
| ● for glass FOC with 50/125 µm / at 3 dB/km / maximum | 3 km | |
| ● for glass FOC with 62.5/125 µm / at 3.5 dB/km / maximum | 3 km | |
| Signal-Inputs/outputs | ||
| Operating voltage / of the signaling contacts / at DC / Rated value | 24 V | |
| Operating current / of the signaling contacts / at DC / maximum | 0.1 A | |
| Supply voltage, current consumption, power loss | ||
| Type of voltage / of the supply voltage | DC | |
| Supply voltage / at DC / Rated value | 24 V | |
| Supply voltage / at DC | 18.8 ... 28.8 V | |
| Product component / fusing at power supply input | Yes | |
| Consumed current / at DC / at 24 V / maximum | 0.2 A | |
| Permitted ambient conditions | ||
| Ambient temperature | ||
| ● during operation | -25 ... +60 °C | |
| ● during storage | -40 ... +70 °C | |
| ● during transport | -40 ... +70 °C | |
| Ambient condition / relating to ambient temperature - air pressure - installation altitude | -25 ... +60°C at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // -25 ... +50°C at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // -25 ... +40°C at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity / with condensation / maximum | 100 %; r.F., incl. condensation/frost permitted (no commissioning in bedewed state) | |
| Resistance to biologically active substances / conformity acc. to EN 60721-3-3 | Yes; Compliant with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna). The supplied plug covers must remain in place on the unused interfaces during operation. | |
| Resistance to chemically active substances / conformity acc. to EN 60721-3-3 | Yes; Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3). The supplied plug covers must remain in place on the unused interfaces during operation. | |
| Resistance to mechanically active substances / conformity acc. to EN 60721-3-3 | Yes; Compliant with EN 60721-3-3, Class 3S4 incl. sand, dust. The supplied plug covers must remain in place on the unused interfaces during operation. | |
| Protection class IP | IP40 | |
| Design, dimensions and weight | ||
| Design | compact | |
| Width | 39.5 mm | |
| Height | 112 mm | |
| Depth | 74.5 mm | |
| Net weight | 340 g | |
| Mounting type | ||
| ● 35 mm DIN rail mounting | Yes | |
| ● wall mounting | Yes | |
| Product functions / Redundancy | ||
| Product function / Ring redundancy | Yes | |
| Standards, specifications, approvals | ||
| Standard | ||
| ● for FM | - | |
| ● for hazardous zone | No | |
| ● for safety / from CSA and UL | No | |
| ● for hazardous zone / from CSA and UL | No | |
| ● for emitted interference | EN 61000-6-4 (Class A) | |
| ● for interference immunity | EN 61000-6-3 | |
| Certificate of suitability | EN 61000-6-2, EN 61000-6-5 | |
| ● CE marking | Yes | |
| ● C-Tick | No | |
| Marine classification association | ||
| ● American Bureau of Shipping Europe Ltd. (ABS) | No | |
| ● Bureau Veritas (BV) | No | |
| ● Det Norske Veritas (DNV) | No | |
| ● Germanische Lloyd (GL) | No | |
| ● Lloyds Register of Shipping (LRS) | No | |
| ● Nippon Kaiji Kyokai (NK) | No | |
| ● Polski Rejestr Statkow (PRS) | No | |
| Further Information / Internet Links | ||
| Internet-Link | ||
| ● to website: Selector SIMATIC NET SELECTION TOOL | http://www.siemens.com/snst | |
| ● to website: Industrial communication | http://www.siemens.com/simatic-net | |
| ● to website: Industry Mall | https://mall.industry.siemens.com | |
| ● to website: Information and Download Center | http://www.siemens.com/industry/infocenter | |
| ● to website: Image database | http://automation.siemens.com/bilddb | |
| ● to website: CAx Download Manager | http://www.siemens.com/cax | |
| ● to website: Industry Online Support | https://support.industry.siemens.com | |
| Security information | ||
| Security information | Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action(e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) | |
| last modified: | 02/03/2017 | |
