Technická data
Název:
SIPLUS NET TIM 3V-IE DNP3
Popis:
SIPLUS NET TIM 3V-IE DNP3 FOR MEDIALE STRESS -25... +70 DEGREES C BASED-ON 6NH7803-3BA00-0AA0 COMMUNICATIONSGROUP FOR SIMATIC S7-300 WITH RS232-INTERFACE
Technické informace:
Product type designation | SIPLUS NET TIM 3V-IE DNP3 | |
Interfaces | ||
Number of interfaces / acc. to Industrial Ethernet | 1 | |
Number of electrical connections | ||
● for power supply | 1 | |
Type of electrical connection | ||
● for power supply | 2-pole plugable terminal block | |
design of the removable storage / C-PLUG | No | |
Supply voltage, current consumption, power loss | ||
Type of voltage / of the supply voltage | DC | |
Consumed current | ||
● from external supply voltage / at DC / at 24 V / maximum | 0.2 A | |
Power loss [W] | 5.8 W | |
Permitted ambient conditions | ||
Ambient temperature | ||
● during operation | -25 ... +70 °C | |
● during storage | -40 ... +70 °C | |
● during transport | -40 ... +70 °C | |
Ambient condition / relating to ambient temperature - air pressure - installation altitude | -25 ... +70°C at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // -25 ... +60°C at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // -25 ... +50°C at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity / with condensation / maximum | 100 %; r.F., incl. condensation/frost permitted (no commissioning in bedewed state) | |
Resistance to biologically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Compliance with EN 60721-3-3, Class 3B2 mold, fungus, and sponge spores (except fauna). The supplied plug covers must remain in place over the unused interfaces during operation! | |
Resistance to chemically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3). The supplied plug covers must remain in place over the unused interfaces during operation! | |
Resistance to mechanically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation! | |
Protection class IP | IP20 | |
Design, dimensions and weight | ||
Module format | Compact module S7-300 single width | |
Width | 40 mm | |
Height | 125 mm | |
Depth | 120 mm | |
Net weight | 0.25 kg | |
Product properties, functions, components / general | ||
Number of units | ||
● Note | Number of TIMs per S7-300: 1 | |
Performance data / S7 communication | ||
Number of possible connections / for S7 communication | ||
● maximum | 3 | |
● with PG connections / maximum | 2 | |
● Note | only via LAN | |
Performance data / telecontrol | ||
Suitability for use | ||
● Node station | Yes | |
● substation | Yes | |
● TIM control center | Yes | |
Protocol / is supported | ||
● TCP/IP | Yes | |
● DNP3 | Yes | |
Product function / data buffering if connection is aborted | Yes; 64,000 data points with one master | |
Configuration software | ||
● required | SINAUT ST7 ES | |
Further Information / Internet Links | ||
Internet-Link | ||
● to website: Selector SIMATIC NET SELECTION TOOL | http://www.siemens.com/snst | |
● to website: Industrial communication | http://www.siemens.com/simatic-net | |
● to website: Industry Mall | https://mall.industry.siemens.com | |
● to website: Information and Download Center | http://www.siemens.com/industry/infocenter | |
● to website: Image database | http://automation.siemens.com/bilddb | |
● to website: CAx Download Manager | http://www.siemens.com/cax | |
● to website: Industry Online Support | https://support.industry.siemens.com | |
Security information | ||
Security information | Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action(e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) | |
last modified: | 01/30/2017 |