Technická data
Název:
SIPLUS SINAUT ST7 TIM 4R-IE
Popis:
SIPLUS ST7 TIM 4R-IE - 25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6NH7800-4BA00 . COMMUNICATION MODULE FOR SIMATIC S7-300, S7-400, C7, PC; WITH TWO RS232/RS485 INTERFACES FOR SINAUT COMMUNICATION VIA CLASSIC WAN NETWORKS AND TWO RJ45-INTERFACES FOR SINAUT COMMUNICATION VIA IP-BASED NETWORKS (WAN OR LAN)
Technické informace:
Product type designation | PLUS SINAUT ST7, TIM 4R-IE | |
Transmission rate | ||
Transfer rate | ||
● for Industrial Ethernet | 10 ... 100 Mbit/s | |
● acc. to RS 232 | 50 ... 38400 bit/s | |
Interfaces | ||
Number of interfaces / acc. to Industrial Ethernet | 2 | |
Number of electrical connections | ||
● for external data transmission / acc. to RS 232 | 2 | |
● for power supply | 1 | |
Type of electrical connection | ||
● of Industrial Ethernet interface | RJ45 port | |
● at interface 1 / for external data transmission | 9 pin Sub-D-connector, RS232 switchable to RS485 | |
● at interface 2 / for external data transmission | 9-pole D-sub connector, RS232 can be switched to RS485 | |
● for power supply | 2-pole plugable terminal block | |
design of the removable storage / C-PLUG | Yes | |
Supply voltage, current consumption, power loss | ||
Type of voltage / of the supply voltage | DC | |
Supply voltage | 24 V | |
Supply voltage | 20.4 ... 28.8 V | |
Supply voltage / external / at DC / Rated value | 24 V | |
Supply voltage / external / at DC / rated value | 20.4 ... 28.8 V | |
Consumed current | ||
● from backplane bus / at DC / at 24 V / maximum | 0.2 A | |
● from external supply voltage / at DC / at 24 V / maximum | 0.17 A | |
Power loss [W] | 4.6 W | |
Product extension / optional / Backup battery | Yes | |
Type of battery | Lithium AA / 3.6 V / 2.3 Ah | |
Backup current | ||
● typical | 100 µA | |
● maximum | 160 µA | |
Permitted ambient conditions | ||
Ambient temperature | ||
● during operation | -25 ... +70 °C | |
● during storage | -40 ... +70 °C | |
● during transport | -40 ... +70 °C | |
Ambient condition / relating to ambient temperature - air pressure - installation altitude | -25 ... +70°C at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // -25 ... +60°C at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // -25 ... +50°C at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity / with condensation / maximum | 100 %; r.F., incl. condensation/frost permitted (no commissioning in bedewed state) | |
Resistance to biologically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Compliance with EN 60721-3-3, Class 3B2 mold, fungus, and sponge spores (except fauna). The supplied plug covers must remain in place over the unused interfaces during operation! | |
Resistance to chemically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3). The supplied plug covers must remain in place over the unused interfaces during operation! | |
Resistance to mechanically active substances | ||
● conformity acc. to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation! | |
Protection class IP | IP20 | |
Design, dimensions and weight | ||
Module format | Compact module S7-300 double width | |
Width | 80 mm | |
Height | 125 mm | |
Depth | 120 mm | |
Net weight | 0.4 kg | |
Product properties, functions, components / general | ||
Wire length | ||
● with RS 232 interface / maximum | 6 m | |
● with RS 485 interface / maximum | 30 m | |
Performance data / S7 communication | ||
Number of possible connections / for S7 communication | ||
● maximum | 64 | |
● with PG connections / maximum | 2 | |
● with OP connections / maximum | 62 | |
Service | ||
● SINAUT ST7 via S7 communication | Yes | |
● PG/OP communication | Yes | |
Performance data / multi-protocol mode | ||
Number of active connections / with multi-protocol mode | 128 | |
Performance data / telecontrol | ||
Suitability for use | ||
● Node station | Yes | |
● substation | Yes | |
● TIM control center | Yes | |
Protocol / is supported | ||
● TCP/IP | Yes | |
● SINAUT ST1 protocol | Yes | |
● SINAUT ST7 protocol | Yes | |
Storage capacity | ||
● Note | TD7onCPU: at least 20 KB, actual requirement determined by data volume and functional scope TD7onTIM: 0 bytes in most favorable case | |
Product feature / Buffered message frame memory | Yes | |
Transmission format | ||
● for SINAUT ST1 protocol with polling / 11 bit | Yes | |
● for SINAUT ST1 protocol with spontaneous / 10-bit or 11-bit | Yes | |
● for SINAUT ST7 protocol with multi-master polling / 10-bit | Yes | |
● for SINAUT ST7 protocol with polling or spontaneous / 10-bit or 11-bit | Yes | |
Operating mode for scanning of data transmission | ||
● with dedicated line/radio link / with SINAUT ST1 protocol | Polling, polling with time slot procedure | |
● with dedicated line/radio link / with SINAUT ST7 protocol | Polling, polling with time slot procedure, multi-master polling with time slot procedure | |
● with dial-up network / with SINAUT ST1 protocol | spontaneous | |
● with dial-up network / with SINAUT ST7 protocol | spontaneous | |
Hamming distance | ||
● for SINAUT ST1 protocol | 4 | |
● for SINAUT ST7 protocol | 4 | |
Configuration software | ||
● required | SINAUT ST7 ES | |
● for CPU configuring / required / SINAUT TD7 block library for CPU | Yes | |
● for PG configuring / required / SINAUT ST7 configuration software for PG | Yes | |
Storage location / of TIM configuration data | on internal TIM flash memory, or on TIM in optional C‑PLUG, or on MMC of the S7-300 CPU if TIM installed in S7-300 controller | |
Product functions / Security | ||
Suitability for operation / Virtual Private Network | Yes | |
Type of authentication / with Virtual Private Network / PSK | Yes | |
Protocol | ||
● with Virtual Private Network MSC / is supported | TCP/IP | |
Product functions / Time | ||
Product component / Hardware real-time clock | Yes | |
Product feature / Hardware real-time clock w. battery backup | Yes | |
Accuracy / of the hardware real-time clock / per day / maximum | 4 s | |
Further Information / Internet Links | ||
Internet-Link | ||
● to website: Selector SIMATIC NET SELECTION TOOL | http://www.siemens.com/snst | |
● to website: Industrial communication | http://www.siemens.com/simatic-net | |
● to website: Industry Mall | https://mall.industry.siemens.com | |
● to website: Information and Download Center | http://www.siemens.com/industry/infocenter | |
● to website: Image database | http://automation.siemens.com/bilddb | |
● to website: CAx Download Manager | http://www.siemens.com/cax | |
● to website: Industry Online Support | https://support.industry.siemens.com | |
Security information | ||
Security information | Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action(e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) | |
last modified: | 01/30/2017 |