6AG1210-1PE21-2UL0

Technická data

Název:

SIPLUS G120 PM240-2 FSB 7,5kW

Popis:

SIPLUS G120 PM240-2 FSB 7.5KW POWER MODULE PM240-2 WITHOUT FILTER -20 ... +50 DEGREES C WITH CONFORMAL COATING BASED ON 6SL3210-1PE21-8UL0 . WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 5,5KW FOR 200% 3S,150% 57S,100% 240S OUTPUT LOW OVERLOAD: 7,5KW FOR 150% 3S,110% 57S,100% 240S 291 X 100 X 165 (HXWXD), FSB PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR FIRMWARE- VERSION V4.6

Technické informace:

product brandname			SIPLUS
Product designation			Power unit
Input current
● with low overload / rated value		A	22.2
● with high overload / rated value		A	19.8
Output current
● rated value / maximum		A	27
● without overload / rated value		A	18
● with low overload / rated value		A	18
● with high overload / rated value		A	13.2
Supplied active power / at rated value of output voltage
● with low overload		kW	7.5
● with high overload		kW	5.5
Efficiency			0.97
Cooling air flow		m³/s	0.0092
1 m measuring surface sound pressure level / maximum		dB	62
Type of electrical connection
● for PE conductor			Plug-in screw terminals
● for mains supply line			Plug-in screw terminals
● of the motor			Plug-in screw terminals
Connectable conductor cross-section / for mains supply line		mm²	1.5 ... 6
Connectable conductor cross-section / for motor supply line		mm²	1.5 ... 6
Wire length / for motor / shielded / maximum		m	50
Power loss [W] / maximum		kW	0.2
Protection class IP			IP20
Width		mm	100
Height		mm	292
Depth		mm	165
Design of the converter			FSB
Net weight		kg	3
Ambient temperature / during operation / maximum		°C	55
Relative humidity / without condensation / during operation / maximum / Note			RH incl. condensation/frost (no commissioning in bedewed state)
Relative humidity / without condensation / during operation / maximum		%	100
Touch protection / acc. to EN 61800-5-1			Assuming use as prescribed
Operating resource protection class / acc. to EN 61800-5-1			Class I (with protective bonding circuit) and Class III (PELV)
Ambient temperature
● during storage		°C	-25 ... +55
● during transport		°C	-40 ... +70
Ambient temperature [°F]
● during storage		°F	-13 ... +131
● during storage / maximum / Note			Class 1K3 acc. to EN 60721-3-1
● during transport		°F	-40 ... +158
● during transport / maximum / Note			Class 2K3 according to EN 60721-3-2
Degree of pollution			2 according to EN 61800-5-1
Resistance to biologically active substances / conformity acc. to EN 60721-3-3			Yes
Resistance to biologically active substances			Class 3B2 acc. to EN 60721-3-3, mold and fungal spores (except fauna)
● conformity acc. to EN 60721-3-3 / Note			The supplied plug covers must remain in place over the unused interfaces during operation!
conformity acc. to EN 60721-3-3			Yes
Resistance to chemically active substances			Class 3C4 acc. to EN 60721-3-3, including salt spray acc. to EN 60068-2-52 (severity level 3)
● conformity acc. to EN 60721-3-3 / Note			Compliant with EN 60721-3-3, Class 3C4 incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation.
Resistance to mechanically active substances / conformity acc. to EN 60721-3-3			No
Certificate of suitability			CE / TÜV
Certificate of suitability / for CE marking			EMC Directive 2004/108/EC, Low-Voltage Directive 2006/95/EC
Standard / for EMC / acc. to EN 61800-3			The EMC product standard EN 61800-3 does not apply directly to a frequency inverter but to a PDS (Power Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter.
Product component / Line filter			No
Type of voltage / of the input voltage			AC
Electrical output frequency
● for U/f control		Hz	0 ... 650
● for vector control		Hz	0 ... 200
Pulse frequency / rated value		kHz	4
Output voltage in percent / related to the input voltage		%	0 ... 95
Type of duty cycle duration
● with low overload			1.1 x rated output current (i.e. 110 % overload) for 57 s with a cycle time of 300 s 1.5 × rated output current (i.e. 150 % overload) for 3 s with a cycle time of 300 s
● with high overload			1.5 × output current rating (i.e., 150 % overload) for 57 s with a cycle time of 300 s 2 × output current rating (i.e., 200 % overload) for 3 s with a cycle time of 300 s
Type of cooling			Internal air cooling
Installation altitude / at height above sea level / without power reduction / maximum		m	1 000
Short-time withstand current (SCCR) / of the entire control cabinet / acc. to UL 508A		kA	65
Protection function
● undervoltage protection			Yes
● Overvoltage protection			Yes
● Overload protection			Yes
● Ground fault protection			Yes
● Short-circuit protection			Yes
● Stall protection			Yes
● with blocked rotor			Yes
● for motor / Temperature monitoring			Yes
● for converter / Temperature monitoring			Yes
Shock acceleration / during operation / Note			(15 × g)/11 ms
Vibration frequency / with constant deflection / during operation / acc. to EN 60068-2-6 / maximum / Note			constant deflection 0.075 mm
Vibration frequency / with constant deflection / during operation / acc. to EN 60068-2-6		Hz	10 ... 58
Vibration frequency / with constant acceleration / during operation / acc. to EN 60068-2-6 / maximum / Note			constant acceleration = 9.81 m/s2 (1 × g)
Vibration frequency / with constant acceleration / during operation / acc. to EN 60068-2-6		Hz	58 ... 200
Certificates/ approvals:
General Product Approval EMC Declaration of Conformity sonstig
Further information
Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs
Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=6AG1210-1PE21-2UL0
Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=6AG1210-1PE21-2UL0
Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/6AG1210-1PE21-2UL0
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=6AG1210-1PE21-2UL0&lang=en