ÚvodÚvod
Úvod
  • O nás
    • Základní údaje o společnosti
    • Historie
    • Partnerství a certifikáty
    • Reference
  • Obory
    • Komplexní Automatizace
    • Výrobní Informatika
    • Integrační projekty a průmysl 4.0
    • Dodávky HW
    • Kurzy a školení
    • Servis 24/7
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
  • Hlavní menu
  • Úvod
    • Přihlášení
    • Registrace
    • Zaslat heslo
    Nákupní košík
  • ENG
www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-200/1200 > SIPLUS S7-1200

6AG1215-1AG40-4XB0

Kód:
6AG1215-1AG40-4XB0
Skladem:
6AG1215-1AG40-4XB0

Technická data

Název:

SIPLUS S7-1200 CPU 1215C DC/DC/DC

Popis:

SIPLUS S7-1200 CPU 1215C DC/DC/DC WITH CONFORMAL COATING BASED ON 6ES7215-1AG40-0XB0 . COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24VDC 10 DO 24VDC 0,5A; 2 AI 0-10V DC 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 100 KB

Technické informace:

General information
Product type designation CPU 1215C DC/DC/DC
Firmware version V4.1
Engineering with
● Programming package STEP 7 V13 SP1 or higher
Display
with display No
Supply voltage
Rated value (DC)
● 24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Load voltage L+
● Rated value (DC) 24 V
● permissible range, lower limit (DC) 5 V
● permissible range, upper limit (DC) 250 V
Input current
Current consumption (rated value) 500 mA; CPU only
Current consumption, max. 1 500 mA; CPU with all expansion modules
Inrush current, max. 12 A; at 28.8 V DC
Output current
for backplane bus (5 V DC), max. 1 600 mA; Max. 5 V DC for SM and CM
Encoder supply
24 V encoder supply
● 24 V L+ minus 4 V DC min.
Power loss
Power loss, typ. 12 W
Memory
Work memory
● integrated 125 kbyte
● expandable No
Load memory
● integrated 4 Mbyte
● Plug-in (SIMATIC Memory Card), max. with SIMATIC memory card
Backup
● present Yes; maintenance-free
● without battery Yes
CPU processing times
for bit operations, typ. 0.085 µs; / instruction
for word operations, typ. 1.5 µs; / instruction
for floating point arithmetic, typ. 2.5 µs; / instruction
CPU-blocks
Number of blocks (total) DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
● Number, max. Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max. 10 kbyte
Flag
● Number, max. 8 kbyte; Size of bit memory address area
Address area
I/O address area
● Inputs 1 024 byte
● Outputs 1 024 byte
Process image
● Inputs, adjustable 1 kbyte
● Outputs, adjustable 1 kbyte
Hardware configuration
Number of modules per system, max. 3 comm. modules, 1 signal board, 8 signal modules
Time of day
Clock
● Hardware clock (real-time) Yes
● Backup time 480 h; Typical
● Deviation per day, max. +/- 60 s/month at 25 °C
Digital inputs
Number of digital inputs 14; Integrated
● of which inputs usable for technological functions 6; HSC (High Speed Counting)
Source/sink input Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max. 14
Input voltage
● Rated value (DC) 24 V
● for signal "0" 5 V DC at 1 mA
● for signal "1" 15 V DC at 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
— at "0" to "1", min. 0.2 ms
— at "0" to "1", max. 12.8 ms
for interrupt inputs
— parameterizable Yes
for counter/technological functions
— parameterizable Single phase : 3 at 100 kHz & 3 at 30 kHz, differential: 3 at 80 kHz & 3 at 30 kHz
Cable length
● shielded, max. 500 m; 50 m for technological functions
● unshielded, max. 300 m; For technological functions: No
Digital outputs
Number of digital outputs 10
● of which high-speed outputs 4; 100 kHz Pulse Train Output
Switching capacity of the outputs
● with resistive load, max. 0.5 A
Output delay with resistive load
● "0" to "1", max. 1 µs
● "1" to "0", max. 5 µs
Cable length
● shielded, max. 500 m
● unshielded, max. 150 m
Analog inputs
Number of analog inputs 2
Input ranges
● Voltage Yes
Input ranges (rated values), voltages
● 0 to +10 V Yes
● Input resistance (0 to 10 V) ≥100k ohms
Cable length
● shielded, max. 100 m; twisted and shielded
Analog outputs
Number of analog outputs 2
Output ranges, current
● 0 to 20 mA Yes
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 10 bit
● Integration time, parameterizable Yes
● Conversion time (per channel) 625 µs
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 10 bit
Encoder
Connectable encoders
● 2-wire sensor Yes
1. Interface
Interface type PROFINET
Physics Ethernet
Isolated Yes
automatic detection of transmission rate Yes
Autonegotiation Yes
Autocrossing Yes
Functionality
● PROFINET IO Controller Yes
● PROFINET IO Device Yes; Also simultaneously with IO-Device functionality
PROFINET IO Controller
● Transmission rate, max. 100 Mbit/s
Services
— Number of connectable IO Devices, max. 16
PROFINET IO Device
Services
— Shared device Yes
— Number of IO Controllers with shared device, max. 2
Protocols
Supports protocol for PROFINET IO Yes
PROFIBUS Yes; CM 1243-5 required
AS-Interface Yes
Protocols (Ethernet)
● TCP/IP Yes
Further protocols
● MODBUS Yes
Communication functions
S7 communication
● supported Yes
● as server Yes
● as client Yes
Open IE communication
● TCP/IP Yes
● ISO-on-TCP (RFC1006) Yes
● UDP Yes
Web server
● supported Yes
● User-defined websites Yes
Number of connections
● overall 16; dynamically
Test commissioning functions
Status/control
● Status/control variable Yes
● Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
● Forcing Yes
Diagnostic buffer
● present Yes
Integrated Functions
Number of counters 6
Counting frequency (counter) max. 100 kHz
Frequency meter Yes
controlled positioning Yes
Number of position-controlled positioning axes, max. 8
Number of positioning axes via pulse-direction interface 4; With integrated outputs
PID controller Yes
Number of alarm inputs 4
Number of pulse outputs 4
Limit frequency (pulse) 100 kHz
Potential separation
Potential separation digital inputs
● Potential separation digital inputs No
● between the channels, in groups of 1
Potential separation digital outputs
● between the channels No
● between the channels, in groups of 1
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 Yes
— Test voltage at air discharge 8 kV
— Test voltage at contact discharge 6 kV
Interference immunity to cable-borne interference
● Interference immunity on supply lines acc. to IEC 61000-4-4 Yes
● Interference immunity on signal cables acc. to IEC 61000-4-4 Yes
Interference immunity against voltage surge
● on the supply lines acc. to IEC 61000-4-5 Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 Yes
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas Yes; Group 1
● Limit class B, for use in residential areas Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20 Yes
Standards, approvals, certificates
CE mark Yes
Ambient conditions
Free fall
● Fall height, max. 0.3 m; five times, in product package
Ambient temperature during operation
● min. -20 °C; = Tmin; Startup @ 0 °C
● max. 60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Vibrations
● Vibrations 2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail
● Operation, tested according to IEC 60068-2-6 Yes
Shock test
● tested according to IEC 60068-2-27 Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3 Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3 Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
● STEP 7 Yes
Programming
Programming language
— LAD Yes
— FBD Yes
— SCL Yes
Cycle time monitoring
● adjustable Yes
Dimensions
Width 130 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 500 g
last modified: 02/01/2017
Poslat tip známému

Vyplněním tohoto formuláře můžete dát vědět svému známému o tomto výrobku.

Ochrana osobních údajů
Kde jste: www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-200/1200 > SIPLUS S7-1200
MENU
Úvod

Facebook LinkeIn

  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop

SIDAT, spol. s r. o., Jinonická 80, 158 00 Praha  | Staré náměstí 9/8, 619 00 Brno

info@sidat.cz | www.sidat.cz | Ochrana osobních údajů | Cookies

2021 ©  SIDAT automation & informatics, Všechna práva vyhrazena
Provozováno na m@gnetpro
  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
      • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
      • Elektronické/komunikaci podporující spínací přístroje
      • Transformátory, zdroje, tlumivky
      • Siplus
        • SIPLUS Extreme LOGO
        • SIPLUS Extreme ostatní
        • SIPLUS Extreme S7-200/1200
          • SIPLUS S7-1200
          • SIPLUS S7-200
        • SIPLUS Extreme S7-300
        • SIPLUS Extreme S7-400/1500
        • SIPLUS HCS
        • SIPLUS RIC
        • SIPLUS CMS / HCS / ECC
        • SIPLUS SIDOOR
        • SIPLUS Customized Products
      • Vypínače, odpínače a výkonové jističe
      • Průmyslové rozváděče, skříně, přípojnicové systémy
      • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
      • Vypínače a zásuvky, modulové přístroje
      • Rozvodnice, rozváděče, řadové svornice
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
Zavřít okno

Vážený zákazníku,

děkujeme za Váš zájem o naše služby, ale tato verze e-shopu není podporována, aktuálně je vyvíjena nová, do níž zatím není možné se registrovat. Registrace provedená zde je automaticky reportována obchodnímu oddělení, které Vaše kontakty vnáší do systému a tudíž na Vaše podněty bude neprodleně reagovat. Pro zjištění disponibility a ceny komponent zde uvedených (i neuvedených) Vám však doporučujeme dočasně kontaktovat obchodní oddělení prostřednictvím e-mailu (obchod@sidat.cz) či telefonicky (tel. 257 187 920), rádi se budeme Vašemu požadavku individuálně věnovat.

Omlouváme se za případné komplikace, děkujeme za pochopení a těšíme se na další spolupráci!

Váš tým SIDAT.