Technická data
Název:
SIPLUS S7-1200 SM 1222 8DQ
Popis:
SIPLUS S7-1200 SM1222 8DQ -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7222-1BF32-0XB0 . DIGITAL OUTPUT 8 DQ, 24V DC, TRANSISTOR 0.5A
Technické informace:
Supply voltage | ||
permissible range, lower limit (DC) | 20.4 V | |
permissible range, upper limit (DC) | 28.8 V | |
Input current | ||
from backplane bus 5 V DC, max. | 120 mA | |
Power loss | ||
Power loss, typ. | 1.5 W | |
Digital outputs | ||
Number of digital outputs | 8 | |
● in groups of | 1 | |
Short-circuit protection | No; to be provided externally | |
Limitation of inductive shutdown voltage to | typ. (L+) -48 V | |
Switching capacity of the outputs | ||
● with resistive load, max. | 0.5 A | |
● on lamp load, max. | 5 W | |
Output voltage | ||
● Rated value (DC) | 24 V | |
● for signal "0", max. | 0.1 V; with 10 kOhm load | |
● for signal "1", min. | 20 V DC | |
Output current | ||
● for signal "1" rated value | 0.5 A | |
● for signal "0" residual current, max. | 10 µA | |
Output delay with resistive load | ||
● "0" to "1", max. | 50 µs | |
● "1" to "0", max. | 200 µs | |
Total current of the outputs (per group) | ||
horizontal installation | ||
— up to 50 °C, max. | 4 A; Current per mass | |
Relay outputs | ||
Switching capacity of contacts | ||
— with inductive load, max. | 0.5 A | |
— on lamp load, max. | 5 W | |
— with resistive load, max. | 0.5 A | |
Cable length | ||
● shielded, max. | 500 m | |
● unshielded, max. | 150 m | |
Interrupts/diagnostics/status information | ||
Alarms | Yes | |
Diagnostic functions | Yes | |
Alarms | ||
● Diagnostic alarm | Yes | |
Diagnostic messages | ||
● Monitoring the supply voltage | Yes | |
Diagnostics indication LED | ||
● for status of the outputs | Yes | |
● for maintenance | Yes | |
● Status indicator digital output (green) | Yes | |
Potential separation | ||
Potential separation digital outputs | ||
● between the channels, in groups of | 1 | |
● between the channels and backplane bus | 500 V AC | |
Degree and class of protection | ||
Degree of protection acc. to EN 60529 | ||
● IP20 | Yes | |
Standards, approvals, certificates | ||
CE mark | Yes | |
Ambient conditions | ||
Free fall | ||
● Fall height, max. | 0.3 m; five times, in product package | |
Ambient temperature during operation | ||
● min. | -40 °C; = Tmin; Startup @ -25 °C | |
● max. | 70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position | |
Ambient temperature during storage/transportation | ||
● min. | -40 °C | |
● max. | 70 °C | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Connection method | ||
required front connector | Yes | |
Mechanics/material | ||
Enclosure material (front) | ||
● Plastic | Yes | |
Dimensions | ||
Width | 45 mm | |
Height | 100 mm | |
Depth | 75 mm | |
Weights | ||
Weight, approx. | 180 g | |
last modified: | 02/01/2017 |