Technická data
Název:
SIPLUS S7-1200 SM 1222 16DQ RLY
Popis:
SIPLUS S7-1200 SM1222 16DQ RY -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7222-1HH32-0XB0 . DIGITAL OUTPUT 16 DQ, RELAY 2A
Technické informace:
| Supply voltage | ||
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from backplane bus 5 V DC, max. | 135 mA | |
| Digital outputs | ||
| ● from load voltage L+, max. | 11 mA/relay coil | |
| Power loss | ||
| Power loss, typ. | 8.5 W | |
| Digital outputs | ||
| Number of digital outputs | 16 | |
| ● in groups of | 1 | |
| Short-circuit protection | No; to be provided externally | |
| Switching capacity of the outputs | ||
| ● with resistive load, max. | 2 A | |
| ● on lamp load, max. | 30 W with DC, 200 W with AC | |
| Output voltage | ||
| ● Rated value (DC) | 5 V DC to 30 V DC | |
| ● Rated value (AC) | 5 V AC to 250 V AC | |
| Output current | ||
| ● for signal "1" permissible range, max. | 2 A | |
| Output delay with resistive load | ||
| ● "0" to "1", max. | 10 ms | |
| ● "1" to "0", max. | 10 ms | |
| Total current of the outputs (per group) | ||
| horizontal installation | ||
| — up to 50 °C, max. | 10 A; Current per mass | |
| Relay outputs | ||
| ● Number of relay outputs | 16 | |
| ● Rated supply voltage of relay coil L+ (DC) | 24 V | |
| ● Number of operating cycles, max. | mechanically 10 million, at rated load voltage 100 000 | |
| Switching capacity of contacts | ||
| — with inductive load, max. | 2 A | |
| — on lamp load, max. | 30 W with DC, 200 W with AC | |
| — with resistive load, max. | 2 A | |
| Cable length | ||
| ● shielded, max. | 500 m | |
| ● unshielded, max. | 150 m | |
| Interrupts/diagnostics/status information | ||
| Alarms | Yes | |
| Diagnostic functions | Yes | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| Diagnostic messages | ||
| ● Monitoring the supply voltage | Yes | |
| Diagnostics indication LED | ||
| ● for status of the outputs | Yes | |
| ● for maintenance | Yes | |
| ● Status indicator digital output (green) | Yes | |
| Potential separation | ||
| Potential separation digital outputs | ||
| ● between the channels | Relays | |
| ● between the channels, in groups of | 4 | |
| ● between the channels and backplane bus | 1500 V AC for 1 minute | |
| Permissible potential difference | ||
| between different circuits | 750 V AC for 1 minute | |
| Degree and class of protection | ||
| Degree of protection acc. to EN 60529 | ||
| ● IP20 | Yes | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| Ambient conditions | ||
| Free fall | ||
| ● Fall height, max. | 0.3 m; five times, in product package | |
| Ambient temperature during operation | ||
| ● min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● max. | 70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | Yes | |
| Mechanics/material | ||
| Enclosure material (front) | ||
| ● Plastic | Yes | |
| Dimensions | ||
| Width | 45 mm | |
| Height | 100 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 260 g | |
| last modified: | 02/01/2017 | |
