Technická data
Název:
SIPLUS S7-1200 SM 1226 F-DQ 2xRelay
Popis:
SIPLUS S7-1200 SM 1226 F-DQ 2XRELAY -25 ... +55 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7226-6RA32-0XB0 . F-DQ 2X RLY 5A, PROFISAFE, 70 MM WIDTH, UP TO PL E (ISO 13849-1)/ UP TO SIL3 (IEC 61508)
Technické informace:
| Supply voltage | ||
| Rated value (DC) | ||
| ● 24 V DC | Yes | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from backplane bus 5 V DC, max. | 120 mA | |
| Digital outputs | ||
| ● from load voltage L+, max. | 300 mA | |
| Power loss | ||
| Power loss, typ. | 10 W | |
| Digital outputs | ||
| Output voltage | ||
| ● Rated value (DC) | 5 V DC to 30 V DC | |
| ● Rated value (AC) | 5 V AC to 250 V AC | |
| Output current | ||
| ● for signal "1" permissible range, max. | 5 A maximum per circuit and 10 A maximum of all circuits per module | |
| Relay outputs | ||
| ● Number of relay outputs | 2; 2 circuits per output | |
| Switching capacity of contacts | ||
| — with inductive load, max. | 0.1 Hz, accordance with IEC 60947-5-1, DC-13; 2 Hz, accordance with IEC 60947-5-1, AC-15 | |
| — with resistive load, max. | 2 Hz | |
| Cable length | ||
| ● shielded, max. | 200 m | |
| ● unshielded, max. | 200 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostics indication LED | ||
| ● for status of the outputs | Yes | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| cULus | Yes | |
| FM approval | No | |
| Highest safety class achievable in safety mode | ||
| ● Performance level according to ISO 13849-1 | Category 4, PL e | |
| ● SIL acc. to IEC 61508 | SIL 3 | |
| Ambient conditions | ||
| Free fall | ||
| ● Fall height, max. | 0.3 m; five times, in product package | |
| Ambient temperature during operation | ||
| ● min. | -25 °C; = Tmin | |
| ● max. | 55 °C; = Tmax | |
| ● permissible temperature change | 5°C to 55°C, 3°C / minute | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Mechanics/material | ||
| Enclosure material (front) | ||
| ● Plastic | Yes | |
| Dimensions | ||
| Width | 70 mm | |
| Height | 100 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 300 g | |
| last modified: | 02/01/2017 | |
