Technická data
Název:
SIPLUS S7-1200 SB 1232 1AQ
Popis:
SIPLUS S7-1200 SB1232 1AO FOR MEDIAL STRESS WITH CONFORMAL COATING BASED ON 6ES7232-4HA30-0XB0 . ANALOG OUTPUT 1 AO, +/- 10VDC (12 BIT RES.) OR 0 - 20 MA (11 BIT RES.)
Technické informace:
Input current | ||
from backplane bus 5 V DC, typ. | 15 mA | |
Output voltage | ||
Power supply to the transmitters | ||
● Supply current, max. | 25 mA | |
Power loss | ||
Power loss, typ. | 1.5 W | |
Analog inputs | ||
Number of analog inputs | 0 | |
Analog outputs | ||
Number of analog outputs | 1 | |
Cycle time (all channels) max. | Voltage: 300 μS (R), 750 μS (1 uF) Current: 600 ms (1 mH); 2 ms (10 mH) | |
Output ranges, voltage | ||
● -10 V to +10 V | Yes | |
Output ranges, current | ||
● 0 to 20 mA | Yes | |
Load impedance (in rated range of output) | ||
● with voltage outputs, min. | 1 000 Ω | |
● with current outputs, max. | 600 Ω | |
Cable length | ||
● shielded, max. | 10 m; shielded, twisted pair | |
Errors/accuracies | ||
Temperature error (relative to output range), (+/-) | 25 °C ±0.5%, to 55 °C ±1% | |
Interrupts/diagnostics/status information | ||
Alarms | Yes | |
Diagnostic functions | Yes | |
Diagnostics indication LED | ||
● for status of the outputs | Yes | |
Degree and class of protection | ||
Degree of protection acc. to EN 60529 | ||
● IP20 | Yes | |
Standards, approvals, certificates | ||
CE mark | Yes | |
FM approval | Yes | |
RCM (formerly C-TICK) | Yes | |
Ambient conditions | ||
Free fall | ||
● Fall height, max. | 0.3 m; five times, in product package | |
Ambient temperature during operation | ||
● min. | 0 °C; = Tmin | |
● max. | 55 °C; = Tmax | |
Ambient temperature during storage/transportation | ||
● min. | -40 °C | |
● max. | 70 °C | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Mechanics/material | ||
Enclosure material (front) | ||
● Plastic | Yes | |
Dimensions | ||
Width | 38 mm | |
Height | 62 mm | |
Depth | 21 mm | |
Weights | ||
Weight, approx. | 40 g | |
last modified: | 02/01/2017 |