Technická data
Název:
SIPLUS ET 200SP AI 8xU BASIC
Popis:
SIPLUS ET 200SP AI 8xU BASIC -40 ... +60 °C with conformal coating BasedOn: 6ES7134-6FF00-0AA1 . AI 8XU BASIC, FITS TO BU-TYPE A0, A1, Color Code CC02, Module Diagnosis, 16BIT
Technické informace:
| General information | ||
| Firmware version | ||
| ● FW update possible | Yes | |
| usable BaseUnits | BU type A0, A1 | |
| Color code for module-specific color identification plate | CC02 | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| ● Measuring range scalable | No | |
| Engineering with | ||
| ● PROFIBUS as of GSD version/GSD revision | GSD Revision 5 | |
| ● PROFINET as of GSD version/GSD revision | GSDML V2.3 | |
| Operating mode | ||
| ● Oversampling | No | |
| ● MSI | No | |
| CiR – Configuration in RUN | ||
| Reparameterization possible in RUN | Yes | |
| Calibration possible in RUN | No | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 19.2 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Input current | ||
| Current consumption, max. | 25 mA | |
| Power loss | ||
| Power loss, typ. | 0.7 W | |
| Address area | ||
| Address space per module | ||
| ● Address space per module, max. | 16 byte | |
| Analog inputs | ||
| Number of analog inputs | 8; Single-ended | |
| permissible input voltage for voltage input (destruction limit), max. | 30 V | |
| Cycle time (all channels), min. | 1 ms; per channel | |
| Input ranges (rated values), voltages | ||
| ● 0 to +10 V | Yes; 15 bit | |
| ● Input resistance (0 to 10 V) | 100 kΩ | |
| ● -10 V to +10 V | Yes; 16 bit incl. sign | |
| ● Input resistance (-10 V to +10 V) | 100 kΩ | |
| Cable length | ||
| ● shielded, max. | 200 m | |
| Analog value generation for the inputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 16 bit | |
| ● Integration time, parameterizable | Yes | |
| ● Interference voltage suppression for interference frequency f1 in Hz | 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60) | |
| ● Conversion time (per channel) | 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms | |
| Smoothing of measured values | ||
| ● Number of smoothing levels | 4; None; 4/8/16 times | |
| ● parameterizable | Yes | |
| Encoder | ||
| Connection of signal encoders | ||
| ● for voltage measurement | Yes | |
| ● for current measurement as 4-wire transducer | No | |
| Errors/accuracies | ||
| Linearity error (relative to input range), (+/-) | 0.02 % | |
| Temperature error (relative to input range), (+/-) | 0.009 %/K | |
| Crosstalk between the inputs, min. | -50 dB | |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.05 % | |
| Operational error limit in overall temperature range | ||
| ● Voltage, relative to input range, (+/-) | 0.9 % | |
| Basic error limit (operational limit at 25 °C) | ||
| ● Voltage, relative to input range, (+/-) | 0.3 % | |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | ||
| ● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | Yes | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| ● Limit value alarm | No | |
| Diagnostic messages | ||
| ● Monitoring the supply voltage | Yes | |
| ● Wire-break | No | |
| ● Short-circuit | No | |
| ● Group error | Yes | |
| ● Overflow/underflow | Yes | |
| Diagnostics indication LED | ||
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED | |
| ● Channel status display | Yes; Green LED | |
| ● for channel diagnostics | No | |
| ● for module diagnostics | Yes; green/red DIAG LED | |
| Potential separation | ||
| Potential separation channels | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| ● between the channels and the power supply of the electronics | No | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin | |
| ● horizontal installation, max. | 60 °C; = Tmax | |
| Relative humidity | ||
| ● With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
| Dimensions | ||
| Width | 15 mm | |
| Weights | ||
| Weight, approx. | 31 g | |
| last modified: | 09/25/2017 |
|
