ÚvodÚvod
Úvod
  • O nás
    • Historie
    • Partnerství
    • Reference
    • Kariéra
  • Obory
    • Komplexní Automatizace
    • Výrobní Informatika
    • Integrační projekty a průmysl 4.0
    • Customer Care
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
  • Hlavní menu
  • Úvod
    • Přihlášení
    • Registrace
    • Zaslat heslo
    Nákupní košík
E-shop
www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS ET 200 SP

6AG1134-6HB00-2DA1

Kód:
6AG1134-6HB00-2DA1
Skladem:
6AG1134-6HB00-2DA1

Technická data

Název:

SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS

Popis:

SIPLUS ET 200SP, (-40)-25 ... +60 DEGREE WITH CONFORMAL COATING BASEDON 6ES7134-6HB00-0DA1 . ANALOG INPUT MODULE, AI 2 X U/I 2-,4-WIRE HIGH SPEED FITS TO BU-TYPE A0, A1, COLOR CODE CC00, CHANNEL DIAGNOSIS, 16BIT, +/-0,3%

Technické informace:

General information
Firmware version V2.0
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification plate CC00
Product function
● I&M data Yes; I&M0 to I&M3
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V13 SP1
● STEP 7 configurable/integrated as of version V5.5 SP3 / -
● PROFIBUS as of GSD version/GSD revision GSD Revision 5
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling Yes; 2 channels per module
● MSI No
CiR – Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 39 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 20 mA; max. 50 mA per channel for a duration < 10 s
Power loss
Power loss, typ. 0.95 W; without sensor supply
Address area
Address space per module
● Address space per module, max. 4 byte; + 1 byte for QI information (32 bytes in the oversampling operating mode)
Analog inputs
Number of analog inputs 2; Differential inputs
permissible input voltage for voltage input (destruction limit), max. 30 V
permissible input current for current input (destruction limit), max. 50 mA
Cycle time (all channels), min. 125 µs
Analog input with oversampling Yes
● Values per cycle, max. 16
● Resolution, min. 50 µs
Input ranges (rated values), voltages
● 0 to +10 V Yes; 15 bit
● Input resistance (0 to 10 V) 75 kΩ
● 1 V to 5 V Yes; 13 bit
● Input resistance (1 V to 5 V) 75 kΩ
● -10 V to +10 V Yes; 16 bit incl. sign
● Input resistance (-10 V to +10 V) 75 kΩ
● -5 V to +5 V Yes; 15 bit incl. sign
● Input resistance (-5 V to +5 V) 75 kΩ
Input ranges (rated values), currents
● 0 to 20 mA Yes; 15 bit
● Input resistance (0 to 20 mA) 130 Ω
● -20 mA to +20 mA Yes; 16 bit incl. sign
● Input resistance (-20 mA to +20 mA) 130 Ω
● 4 mA to 20 mA Yes; 14 bit
● Input resistance (4 mA to 20 mA) 130 Ω
Cable length
● shielded, max. 1 000 m; 200 m for voltage measurement
Analog value generation for the inputs
Measurement principle Actual value encryption (successive approximation)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Interference voltage suppression for interference frequency f1 in Hz No
● Conversion time (per channel) 10 µs
Smoothing of measured values
● Number of smoothing levels 7; none; 2-/4-/8-/16-/32-/64-fold
● parameterizable Yes
Encoder
Connection of signal encoders
● for voltage measurement Yes
● for current measurement as 2-wire transducer Yes
— Burden of 2-wire transmitter, max. 650 Ω
● for current measurement as 4-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.03 %
Temperature error (relative to input range), (+/-) 0.01 %/K
Crosstalk between the inputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.1 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-) 0.5 %
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-) 0.2 %
● Current, relative to input range, (+/-) 0.2 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Common mode voltage, max. 35 V
● Common mode interference, min. 90 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Filtering and processing time (TCI), min. 80 µs
Bus cycle time (TDP), min. 125 µs
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
● Limit value alarm Yes; two upper and two lower limit values in each case
Diagnostic messages
● Wire-break Yes; channel-by-channel, at 4 to 20 mA only
● Short-circuit Yes; channel-by-channel, at 1 to 5 V or for current measuring ranges short-circuit in encoder supply
● Group error Yes
● Overflow/underflow Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; Green LED
● for channel diagnostics Yes; Red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels Yes
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics Yes
Permissible potential difference
between different circuits 75 V DC/60 V AC (base isolation)
between the inputs (UCM) 75 V DC/60 V AC
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -40 °C; = Tmin; Startup @ -25 °C
● horizontal installation, max. 60 °C; = Tmax
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3 Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3 Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width 15 mm
Weights
Weight, approx. 32 g
last modified: 02/01/2017
Poslat tip známému

Vyplněním tohoto formuláře můžete dát vědět svému známému o tomto výrobku.

Ochrana osobních údajů
  • Automatizační systémy
  • Nízkonapěťová spínací technika
    • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
    • Elektronické/komunikaci podporující spínací přístroje
    • Transformátory, zdroje, tlumivky
    • Siplus
    • Vypínače, odpínače a výkonové jističe
    • Průmyslové rozváděče, skříně, přípojnicové systémy
    • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
    • Vypínače a zásuvky, modulové přístroje
    • Rozvodnice, rozváděče, řadové svornice
  • Regulované pohony
  • Motory
  • Procesní instrumentace a analyzátory, průmyslové senzory
  • Mechanické pohony
  • Ostatní produkty
  • Zboží skladem (dodání ihned)
Kde jste: www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS ET 200 SP
MENU
Úvod

Facebook LinkeIn

  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop

SIDAT, spol. s r. o., Jinonická 80, 158 00 Praha  | Staré náměstí 9/8, 619 00 Brno

info@sidat.cz | www.sidat.cz | Ochrana osobních údajů

2011 ©  SIDAT automation & informatics, Všechna práva vyhrazena
Provozováno na m@gnetpro
  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
      • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
      • Elektronické/komunikaci podporující spínací přístroje
      • Transformátory, zdroje, tlumivky
      • Siplus
        • SIPLUS Extreme LOGO
        • SIPLUS Extreme ostatní
        • SIPLUS Extreme S7-200/1200
        • SIPLUS Extreme S7-300
          • SIPLUS ET 200 SP
          • SIPLUS ET 200 SP
          • SIPLUS S7-300/mEC / SIPLUS ET 200M
        • SIPLUS Extreme S7-400/1500
        • SIPLUS HCS
        • SIPLUS RIC
        • SIPLUS CMS / HCS / ECC
        • SIPLUS SIDOOR
        • SIPLUS Customized Products
      • Vypínače, odpínače a výkonové jističe
      • Průmyslové rozváděče, skříně, přípojnicové systémy
      • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
      • Vypínače a zásuvky, modulové přístroje
      • Rozvodnice, rozváděče, řadové svornice
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.