Technická data
Název:
SIPLUS ET 200SP CM PTP
Popis:
SIPLUS ET 200SP -40 ... +60 GRAD C STARTUP TEMP.: -25 DEGREE C WITH CONFORMAL COATING BASEDON 6ES7137-6AA00-0BA0 . CM PTP CM PTP COMMUNICATION MODUL FOR SERIAL CONNECTION RS422, RS485 AND RS232, FREEPORT, 3964(R), USS, MODBUS RTU MASTER, SLAVE, 115200 KBIT/S
Technické informace:
| General information | ||
| Product type designation | ET 200SP CM PtP | |
| Firmware version | ||
| ● FW update possible | Yes | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| Engineering with | ||
| ● STEP 7 TIA Portal configurable/integrated as of version | V12 / V12 | |
| ● STEP 7 configurable/integrated as of version | V5.5 SP2 with GSD file | |
| ● PROFIBUS as of GSD version/GSD revision | GSD as of Revision 5 | |
| ● PROFINET as of GSD version/GSD revision | GSDML V2.3 | |
| Installation type/mounting | ||
| Rack mounting possible | Yes | |
| Rail mounting possible | Yes | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 19.2 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Input current | ||
| Current consumption (rated value) | 29 mA | |
| Power loss | ||
| Power loss, typ. | 0.7 W | |
| Address area | ||
| Occupied address area | ||
| ● Inputs | 8 byte | |
| 1. Interface | ||
| Interface types | ||
| ● RS 485 | Yes | |
| ● RS 422 | Yes | |
| ● RS 232 | Yes | |
| Interface types | ||
| RS 232 | ||
| ● Transmission rate, max. | 115.2 kbit/s | |
| ● Cable length, max. | 15 m | |
| ● RS 232 auxiliary signals | RTS, CTS, DTR, DSR, RI, DCD | |
| RS 485 | ||
| ● Transmission rate, max. | 115.2 kbit/s | |
| ● Cable length, max. | 1 200 m | |
| RS 422 | ||
| ● Transmission rate, max. | 115.2 kbit/s | |
| ● Cable length, max. | 1 200 m | |
| ● 4-wire full duplex connection | Yes | |
| ● 4-wire multipoint connection | Yes | |
| Protocols | ||
| Integrated protocols | ||
| Freeport | ||
| — Telegram length, max. | 2 kbyte | |
| — Bits per character | 7 or 8 | |
| — Number of stop bits | 1 or 2 bit | |
| — Parity | None, even, odd, always 1, always 0, any | |
| 3964 (R) | ||
| — Telegram length, max. | 2 kbyte | |
| — Bits per character | 7 or 8 | |
| — Number of stop bits | 1 or 2 bit | |
| — Parity | None, even, odd, always 1, always 0, any | |
| Modbus RTU master | ||
| — Address area | 1 to 247, extended 1 to 65535 | |
| — Number of slaves, max. | 32 | |
| MODBUS RTU slave | ||
| — Address area | 1 to 247, extended 1 to 65535 | |
| Telegram buffer | ||
| ● Buffer memory for telegrams | 4 kbyte | |
| ● Number of telegrams which can be buffered | 255 | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | Yes | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| ● Hardware interrupt | No | |
| Diagnostic messages | ||
| ● Wire-break | Yes | |
| Diagnostics indication LED | ||
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED | |
| ● for module diagnostics | Yes; green/red DIAG LED | |
| ● Receive RxD | Yes; Green LED | |
| ● Transmit TxD | Yes; Green LED | |
| Potential separation | ||
| between backplane bus and interface | Yes | |
| Permissible potential difference | ||
| between different circuits | 75 V DC/60 V AC (base isolation) | |
| Isolation | ||
| Isolation tested with | 707 V DC (type test) | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● horizontal installation, max. | 60 °C; = Tmax | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Decentralized operation | ||
| to SIMATIC S7-300 | Yes | |
| to SIMATIC S7-400 | Yes | |
| to SIMATIC S7-1200 | Yes | |
| to SIMATIC S7-1500 | Yes | |
| to standard PROFINET controller | Yes | |
| Dimensions | ||
| Width | 15 mm | |
| Height | 73 mm | |
| Depth | 58 mm | |
| Weights | ||
| Weight, approx. | 30 g | |
| last modified: | 02/03/2017 | |
