ÚvodÚvod
Úvod
  • O nás
    • Historie
    • Partnerství
    • Reference
    • Kariéra
  • Obory
    • Komplexní Automatizace
    • Výrobní Informatika
    • Integrační projekty a průmysl 4.0
    • Customer Care
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
  • Hlavní menu
  • Úvod
    • Přihlášení
    • Registrace
    • Zaslat heslo
    Nákupní košík
  • EN
E-shop
www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS ET 200 SP

6AG1138-6CG00-2BA0

Kód:
6AG1138-6CG00-2BA0
Skladem:
6AG1138-6CG00-2BA0

Technická data

Název:

SIPLUS ET 200SP TM TIMER DIDQ 10x24V

Popis:

SIPLUS ET 200SP TM TIMER DIDQ 10x24V -40 ... +60°C with conformal coating BasedOn: 6ES7138-6CG00-0BA0 . Time Based Digital Inputs and Outputs 4DI, 6DQ with timestamp COUNT, PWM, oversampling

Technické informace:

General information
Product type designation TM Timer DIDQ 10x24V
usable BaseUnits BU type A0
Product function
● I&M data Yes; I&M 0
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● permissible range, lower limit (DC) 19.2 V
● permissible range, upper limit (DC) 28.8 V
● Reverse polarity protection Yes; against destruction
Input current
Current consumption, max. 50 mA; without load
Encoder supply
Number of outputs 1
24 V encoder supply
● 24 V Yes; L+ (-0.8 V)
● Short-circuit protection Yes
● Output current, max. 500 mA; Observe derating
Power loss
Power loss, typ. 1.5 W
Address area
Occupied address area
● Inputs 26 byte
● Outputs 32 byte
Digital inputs
Number of digital inputs 4
Digital inputs, parameterizable Yes
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Digital input functions, parameterizable
● Digital input with time stamp Yes
— Number, max. 4
● Counter Yes
— Number, max. 3
● Counter for incremental encoder Yes
— Number, max. 1
● Digital input with oversampling Yes
— Number, max. 4
● HW enable for digital input Yes
— Number, max. 1
● HW enable for digital output Yes
— Number, max. 3
Input voltage
● Type of input voltage DC
● Rated value (DC) 24 V
● for signal "0" -30 to +5V
● for signal "1" +11 to +30V
● permissible voltage at input, min. -30 V
● permissible voltage at input, max. 30 V
Input current
● for signal "1", typ. 2.5 mA
Input delay (for rated value of input voltage)
● Minimum pulse width for program reactions 3 µs for parameterization "none"
for standard inputs
— parameterizable Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
— at "0" to "1", min. 4 µs
— at "1" to "0", min. 4 µs
Cable length
● shielded, max. 1 000 m; Depending on sensor, cable quality and rate of change
● unshielded, max. 600 m; Depending on sensor, cable quality and rate of change
Digital outputs
Type of digital output Transistor
Number of digital outputs 6
Current-sinking Yes; With High Speed output
Current-sourcing Yes
Digital outputs, parameterizable Yes
Short-circuit protection Yes; electronic/thermal
● Response threshold, typ. 1.7 A with Standard output, 0.5 A with High Speed output
Limitation of inductive shutdown voltage to -0.8 V
Digital output functions, parameterizable
● Digital output with time stamp Yes
— Number, max. 6
● PWM output Yes
— Number, max. 6
● Digital output with oversampling Yes
— Number, max. 6
Switching capacity of the outputs
● with resistive load, max. 0.5 A; 0.1 A with High Speed output
● on lamp load, max. 5 W; 1 W with High Speed output
Load resistance range
● lower limit 48 Ω; 240 ohm with High Speed output
● upper limit 12 kΩ
Output voltage
● Type of output voltage DC
● for signal "0", max. 1 V; With High Speed output
● for signal "1", min. 23.2 V; L+ (-0.8 V)
Output current
● for signal "1" rated value 0.5 A; 0.1 A with High Speed output, observe derating
● for signal "1" permissible range, max. 0.6 A; 0.12 A with High Speed output, observe derating
● for signal "1" minimum load current 2 mA
● for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
● "0" to "1", max. 1 µs; With High Speed output, 5 µs with Standard output
● "1" to "0", max. 1 µs; With High Speed output, 6 µs with Standard output
Switching frequency
● with resistive load, max. 10 kHz
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per module, max. 3.5 A; Observe derating
Cable length
● shielded, max. 1 000 m; Depending on load and cable quality
● unshielded, max. 600 m; Depending on load and cable quality
Encoder
Connectable encoders
● Incremental encoder (asymmetrical) Yes
● 24 V initiator Yes
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 1.5 mA
Encoder signals, incremental encoder (asymmetrical)
● Input voltage 24 V
● Input frequency, max. 50 kHz
● Counting frequency, max. 200 kHz; with quadruple evaluation
● Cable length, shielded, max. 600 m; Depending on input frequency, encoder and cable quality; max. 200 m at 50 kHz
● Incremental encoder with A/B tracks, 90° phase offset Yes
● Pulse encoder Yes
Encoder signal 24 V
— permissible voltage at input, min. -30 V
— permissible voltage at input, max. 30 V
Interface types
● Input characteristic curve in accordance with IEC 61131, type 3 Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Bus cycle time (TDP), min. 375 µs
Jitter, max. 1 µs
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
Diagnostic messages
● Monitoring the supply voltage Yes
● Short-circuit Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes
● for module diagnostics Yes; green/red DIAG LED
Integrated Functions
Number of counters 3
Counting frequency (counter) max. 200 kHz; with quadruple evaluation
Counting functions
● Continuous counting Yes
Potential separation
Potential separation channels
● between the channels and backplane bus Yes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -40 °C
● horizontal installation, max. 60 °C; = Tmax; see Derating BasedOn (e.g. manual)
● vertical installation, min. 0 °C
● vertical installation, max. 50 °C; = Tmax; see Derating BasedOn (e.g. manual)
Relative humidity
● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Decentralized operation
to SIMATIC S7-1500 Yes
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 45 g
last modified: 09/25/2017
Poslat tip známému

Vyplněním tohoto formuláře můžete dát vědět svému známému o tomto výrobku.

Ochrana osobních údajů
  • Automatizační systémy
  • Nízkonapěťová spínací technika
    • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
    • Elektronické/komunikaci podporující spínací přístroje
    • Transformátory, zdroje, tlumivky
    • Siplus
    • Vypínače, odpínače a výkonové jističe
    • Průmyslové rozváděče, skříně, přípojnicové systémy
    • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
    • Vypínače a zásuvky, modulové přístroje
    • Rozvodnice, rozváděče, řadové svornice
  • Regulované pohony
  • Motory
  • Procesní instrumentace a analyzátory, průmyslové senzory
  • Mechanické pohony
  • Ostatní produkty
  • Zboží skladem (dodání ihned)
Kde jste: www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS ET 200 SP
MENU
Úvod

Facebook LinkeIn

  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop
Provozováno na m@gnetpro
  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
      • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
      • Elektronické/komunikaci podporující spínací přístroje
      • Transformátory, zdroje, tlumivky
      • Siplus
        • SIPLUS Extreme LOGO
        • SIPLUS Extreme ostatní
        • SIPLUS Extreme S7-200/1200
        • SIPLUS Extreme S7-300
          • SIPLUS ET 200 SP
          • SIPLUS ET 200 SP
          • SIPLUS S7-300/mEC / SIPLUS ET 200M
        • SIPLUS Extreme S7-400/1500
        • SIPLUS HCS
        • SIPLUS RIC
        • SIPLUS CMS / HCS / ECC
        • SIPLUS SIDOOR
        • SIPLUS Customized Products
      • Vypínače, odpínače a výkonové jističe
      • Průmyslové rozváděče, skříně, přípojnicové systémy
      • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
      • Vypínače a zásuvky, modulové přístroje
      • Rozvodnice, rozváděče, řadové svornice
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.