Technická data
Název:
SIPLUS ET 200SP BU20-P12+A4+0B
Popis:
SIPLUS ET 200SP -40 ... +70 DEGREE WITH CONFORMAL COATING BASED ON 6ES7193-6BP20-0BB0 . BASEUNIT BU20-P12+A4+0B, BU-TYPE B0, PUSH-IN KLEMMEN, WITH 4 AUX-TERMINALS, BRIDGED TO LEFT BU WXH: 20MMX117MM
Technické informace:
| General information | ||
| Product type designation | BU20-P12+A4+0B | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| Rated value (AC) | 230 V; 110 V | |
| Current carrying capacity | ||
| up to 60 °C, max. | 10 A | |
| Potential separation | ||
| between backplane bus and supply voltage | Yes | |
| Isolation | ||
| Isolation tested with | 3 250 V DC | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin | |
| ● horizontal installation, max. | 70 °C; = Tmax | |
| ● vertical installation, min. | -40 °C | |
| ● vertical installation, max. | 50 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Dimensions | ||
| Width | 20 mm | |
| Height | 117 mm | |
| Depth | 35 mm | |
| Weights | ||
| Weight, approx. | 48 g | |
| last modified: | 02/01/2017 | |
