Technická data
Název:
SIPLUS ET 200SP BU20-P12+A0+4B TYP B1
Popis:
SIPLUS ET 200SP -40 ... +60 GRAD C STARTUP TEMP.: -25 DEGREE C WITH CONFORMAL COATING BASEDON 6ES7193-6BP20-0BB1 . BASEUNIT BU20-P12+A0+4B, BU-TYPE B1, PUSH-IN KLEMMEN, W/O AUX-TERMINALS, BRIDGED TO LEFT BU WXH: 20MMX117MM
Technické informace:
General information | ||
Product type designation | BU20-P12+A0+4B | |
Supply voltage | ||
Rated value (DC) | 24 V | |
Rated value (AC) | 230 V; 110 V | |
Current carrying capacity | ||
up to 60 °C, max. | 10 A | |
Potential separation | ||
between backplane bus and supply voltage | Yes | |
between process terminals and supply voltage | Yes | |
between power bus and supply voltage | Yes | |
Isolation | ||
Isolation tested with | 3 250 V DC | |
Ambient conditions | ||
Ambient temperature during operation | ||
● horizontal installation, min. | -40 °C; = Tmin; Startup @ -25 °C | |
● horizontal installation, max. | 70 °C; = Tmax | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Dimensions | ||
Width | 20 mm | |
Height | 117 mm | |
Depth | 35 mm | |
Weights | ||
Weight, approx. | 48 g | |
last modified: | 02/01/2017 |