Technická data
Název:
SIPLUS ET 200SP CPU 1512SP-1 PN
Popis:
SIPLUS ET 200SP CPU 1512SP-1 PN -40...+60 DEGREE C STARTUP TEMP.: -25 DEGREE C WWITH CONFORMAL COATING BASEDON 6ES7512-1DK01-0AB0 . CPU 1512SP-1 PN FOR ET 200SP, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 200 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 3 PORT SWITCH, 48 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY, BUSADAPTER NECESSARY FOR PORT 1 AND 2
Technické informace:
| General information | ||
| Product type designation | CPU 1512SP-1 PN | |
| Configuration control | ||
| via dataset | Yes | |
| Control elements | ||
| Mode selector switch | 1 | |
| Supply voltage | ||
| Type of supply voltage | 24 V DC | |
| permissible range, lower limit (DC) | 19.2 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Mains buffering | ||
| ● Mains/voltage failure stored energy time | 5 ms | |
| Input current | ||
| Current consumption (rated value) | 0.6 A | |
| Inrush current, max. | 4.7 A; Rated value | |
| I²t | 0.14 A²·s | |
| Power | ||
| Infeed power to the backplane bus | 8.75 W | |
| Power loss | ||
| Power loss, typ. | 5.6 W | |
| Memory | ||
| Number of slots for SIMATIC memory card | 1 | |
| SIMATIC memory card required | Yes | |
| Work memory | ||
| ● integrated (for program) | 200 kbyte | |
| ● integrated (for data) | 1 Mbyte | |
| Load memory | ||
| ● Plug-in (SIMATIC Memory Card), max. | 32 Gbyte | |
| Backup | ||
| ● maintenance-free | Yes | |
| CPU processing times | ||
| for bit operations, typ. | 48 ns | |
| for word operations, typ. | 58 ns | |
| for fixed point arithmetic, typ. | 77 ns | |
| for floating point arithmetic, typ. | 307 ns | |
| CPU-blocks | ||
| Number of elements (total) | 2 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements | |
| DB | ||
| ● Number range | 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 | |
| ● Size, max. | 1 Mbyte; For DBs with absolute addressing, the max. size is 64 KB | |
| FB | ||
| ● Number range | 0 ... 65 535 | |
| ● Size, max. | 200 kbyte | |
| FC | ||
| ● Number range | 0 ... 65 535 | |
| ● Size, max. | 200 kbyte | |
| OB | ||
| ● Size, max. | 200 kbyte | |
| ● Number of free cycle OBs | 100 | |
| ● Number of time alarm OBs | 20 | |
| ● Number of delay alarm OBs | 20 | |
| ● Number of cyclic interrupt OBs | 20 | |
| ● Number of process alarm OBs | 50 | |
| ● Number of DPV1 alarm OBs | 3 | |
| ● Number of isochronous mode OBs | 1 | |
| ● Number of technology synchronous alarm OBs | 2 | |
| ● Number of startup OBs | 100 | |
| ● Number of asynchronous error OBs | 4 | |
| ● Number of synchronous error OBs | 2 | |
| ● Number of diagnostic alarm OBs | 1 | |
| Nesting depth | ||
| ● per priority class | 24 | |
| Counters, timers and their retentivity | ||
| S7 counter | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| IEC counter | ||
| ● Number | Any (only limited by the main memory) | |
| Retentivity | ||
| — adjustable | Yes | |
| S7 times | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| IEC timer | ||
| ● Number | Any (only limited by the main memory) | |
| Retentivity | ||
| — adjustable | Yes | |
| Data areas and their retentivity | ||
| Retentive data area (incl. timers, counters, flags), max. | 128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB | |
| Flag | ||
| ● Number, max. | 16 kbyte | |
| ● Number of clock memories | 8; 8 clock memory bits, grouped into one clock memory byte | |
| Data blocks | ||
| ● Retentivity adjustable | Yes | |
| ● Retentivity preset | No | |
| Local data | ||
| ● per priority class, max. | 64 kbyte; max. 16 KB per block | |
| Address area | ||
| Number of IO modules | 2 048; max. number of modules / submodules | |
| I/O address area | ||
| ● Inputs | 32 kbyte; All inputs are in the process image | |
| ● Outputs | 32 kbyte; All outputs are in the process image | |
| per integrated IO subsystem | ||
| — Inputs (volume) | 8 kbyte | |
| — Outputs (volume) | 8 kbyte | |
| per CM/CP | ||
| — Inputs (volume) | 8 kbyte | |
| — Outputs (volume) | 8 kbyte | |
| Subprocess images | ||
| ● Number of subprocess images, max. | 32 | |
| Address space per module | ||
| ● Address space per module, max. | 32 byte; For input and output data respectively | |
| Address space per station | ||
| ● Address space per station, max. | 1 280 byte; for central inputs and outputs; depending on configuration | |
| Hardware configuration | ||
| Number of distributed IO systems | 20 | |
| Number of DP masters | ||
| ● Via CM | 1 | |
| Number of IO Controllers | ||
| ● integrated | 1 | |
| ● Via CM | 0 | |
| Rack | ||
| ● Modules per rack, max. | 64; CPU + 64 modules + server module (mounting width max. 1 m) | |
| ● Number of lines, max. | 1 | |
| PtP CM | ||
| ● Number of PtP CMs | the number of connectable PtP CMs is only limited by the number of available slots | |
| Time of day | ||
| Clock | ||
| ● Type | Hardware clock | |
| ● Backup time | 6 wk; At 40 °C ambient temperature, typically | |
| ● Deviation per day, max. | 10 s; Typ.: 2 s | |
| Operating hours counter | ||
| ● Number | 16 | |
| Clock synchronization | ||
| ● supported | Yes | |
| ● to DP, master | Yes; Via CM DP module | |
| ● to DP, slave | Yes; Via CM DP module | |
| ● in AS, master | Yes | |
| ● in AS, slave | Yes | |
| ● on Ethernet via NTP | Yes | |
| Interfaces | ||
| Number of PROFINET interfaces | 1 | |
| Number of PROFIBUS interfaces | 1; Via CM DP module | |
| With optical interface | Yes; Via BusAdapter BA 2x SCRJ | |
| 1. Interface | ||
| Interface types | ||
| ● Number of ports | 3; 1. integr. + 2. via BusAdapter | |
| ● integrated switch | Yes | |
| ● RJ 45 (Ethernet) | Yes; X1 | |
| ● BusAdapter (PROFINET) | Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ / RJ45, BA SCRJ / FC | |
| Functionality | ||
| ● PROFINET IO Controller | Yes | |
| ● PROFINET IO Device | Yes | |
| ● SIMATIC communication | Yes | |
| ● Open IE communication | Yes | |
| ● Web server | Yes | |
| ● Media redundancy | Yes | |
| 2. Interface | ||
| Interface types | ||
| ● Number of ports | 1 | |
| ● RS 485 | Yes; Via CM DP module | |
| Functionality | ||
| ● PROFIBUS DP master | Yes | |
| ● PROFIBUS DP slave | Yes | |
| ● SIMATIC communication | Yes | |
| Interface types | ||
| RJ 45 (Ethernet) | ||
| ● 100 Mbps | Yes | |
| ● Autonegotiation | Yes | |
| ● Autocrossing | Yes | |
| ● Industrial Ethernet status LED | Yes | |
| RS 485 | ||
| ● Transmission rate, max. | 12 Mbit/s | |
| Protocols | ||
| Number of connections | ||
| ● Number of connections, max. | 88 | |
| ● Number of connections reserved for ES/HMI/web | 10 | |
| ● Number of connections via integrated interfaces | 88 | |
| ● Number of S7 routing paths | 16 | |
| PROFINET IO Controller | ||
| Services | ||
| — PG/OP communication | Yes | |
| — S7 routing | Yes | |
| — Isochronous mode | Yes | |
| — Open IE communication | Yes | |
| — IRT | Yes | |
| — MRP | Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50 | |
| — PROFIenergy | Yes | |
| — Prioritized startup | Yes; Max. 32 PROFINET devices | |
| — Number of connectable IO Devices, max. | 128; In total, up to 253 distributed I/O devices can be connected via PROFIBUS or PROFINET | |
| — Of which IO devices with IRT, max. | 64 | |
| — Number of connectable IO Devices for RT, max. | 128 | |
| — of which in line, max. | 128 | |
| — Number of IO Devices that can be simultaneously activated/deactivated, max. | 8 | |
| — Number of IO Devices per tool, max. | 8 | |
| — Updating times | The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data | |
| Update time for IRT | ||
| — for send cycle of 250 µs | 250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive | |
| — for send cycle of 500 µs | 500 μs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive | |
| — for send cycle of 1 ms | 1 ms to 16 ms | |
| — for send cycle of 2 ms | 2 ms to 32 ms | |
| — for send cycle of 4 ms | 4 ms to 64 ms | |
| — With IRT and parameterization of "odd" send cycles | Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) | |
| Update time for RT | ||
| — for send cycle of 250 µs | 250 µs to 128 ms | |
| — for send cycle of 500 µs | 500 µs to 256 ms | |
| — for send cycle of 1 ms | 1 ms to 512 ms | |
| — for send cycle of 2 ms | 2 ms to 512 ms | |
| — for send cycle of 4 ms | 4 ms to 512 ms | |
| PROFINET IO Device | ||
| Services | ||
| — PG/OP communication | Yes | |
| — S7 routing | Yes | |
| — Isochronous mode | No | |
| — Open IE communication | Yes | |
| — IRT | Yes | |
| — MRP | Yes | |
| — PROFIenergy | Yes | |
| — Shared device | Yes | |
| — Number of IO Controllers with shared device, max. | 4 | |
| SIMATIC communication | ||
| ● S7 communication, as server | Yes | |
| ● S7 communication, as client | Yes | |
| ● User data per job, max. | See online help (S7 communication, user data size) | |
| Open IE communication | ||
| ● TCP/IP | Yes | |
| — Data length, max. | 64 kbyte | |
| — several passive connections per port, supported | Yes | |
| ● ISO-on-TCP (RFC1006) | Yes | |
| — Data length, max. | 64 kbyte | |
| ● UDP | Yes | |
| — Data length, max. | 1 472 byte | |
| ● DHCP | No | |
| ● SNMP | Yes | |
| ● DCP | Yes | |
| ● LLDP | Yes | |
| Web server | ||
| ● HTTP | Yes; Standard and user-defined pages | |
| ● HTTPS | Yes; Standard and user-defined pages | |
| PROFIBUS DP master | ||
| ● Number of connections, max. | 48 | |
| Services | ||
| — PG/OP communication | Yes | |
| — S7 routing | Yes | |
| — Data record routing | Yes | |
| — Isochronous mode | No | |
| — Equidistance | No | |
| — Number of DP slaves | 125 | |
| — Activation/deactivation of DP slaves | Yes | |
| Further protocols | ||
| ● MODBUS | Yes; MODBUS TCP | |
| Media redundancy | ||
| ● Switchover time on line break, typ. | 200 ms | |
| ● Number of stations in the ring, max. | 50 | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs | |
| S7 message functions | ||
| Number of login stations for message functions, max. | 32 | |
| Block related messages | Yes | |
| Number of configurable alarms, max. | 5 000 | |
| Number of simultaneously active alarms in alarm pool | ||
| ● Number of reserved user alarms | 300 | |
| ● Number of reserved alarms for system diagnostics | 100 | |
| ● Number of reserved alarms for Motion Control technology objects | 80 | |
| Test commissioning functions | ||
| Joint commission (Team Engineering) | Yes; Parallel online access possible for up to 3 engineering systems | |
| Status block | Yes; up to 8 simultaneously | |
| Single step | No | |
| Status/control | ||
| ● Status/control variable | Yes | |
| ● Variables | Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters | |
| ● Number of variables, max. | ||
| — of which status variables, max. | 200; per job | |
| — of which control variables, max. | 200; per job | |
| Forcing | ||
| ● Forcing | Yes | |
| ● Forcing, variables | Peripheral inputs/outputs | |
| ● Number of variables, max. | 200 | |
| Diagnostic buffer | ||
| ● present | Yes | |
| ● Number of entries, max. | 1 000 | |
| — of which powerfail-proof | 500 | |
| Traces | ||
| ● Number of configurable Traces | 4; Up to 512 KB of data per trace are possible | |
| Interrupts/diagnostics/status information | ||
| Diagnostics indication LED | ||
| ● RUN/STOP LED | Yes | |
| ● ERROR LED | Yes | |
| ● MAINT LED | Yes | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes | |
| ● Connection display LINK TX/RX | Yes | |
| Supported technology objects | ||
| Motion Control | Yes | |
| ● Speed-controlled axis | ||
| — Number of speed-controlled axes, max. | 6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool | |
| ● Positioning axis | ||
| — Number of positioning axes, max. | 6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool | |
| ● Synchronized axes (relative gear synchronization) | ||
| — Number of axes, max. | 3; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool | |
| ● External encoders | ||
| — Number of external encoders, max. | 6; Requirement: There must be no other motion technology objects created; note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool | |
| Controller | ||
| ● PID_Compact | Yes; Universal PID controller with integrated optimization | |
| ● PID_3Step | Yes; PID controller with integrated optimization for valves | |
| ● PID-Temp | Yes; PID controller with integrated optimization for temperature | |
| Counting and measuring | ||
| ● High-speed counter | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● horizontal installation, max. | 60 °C | |
| ● vertical installation, min. | 0 °C | |
| ● vertical installation, max. | 50 °C | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Configuration | ||
| Programming | ||
| Programming language | ||
| — LAD | Yes | |
| — FBD | Yes | |
| — STL | Yes | |
| — SCL | Yes | |
| — GRAPH | Yes | |
| Know-how protection | ||
| ● User program protection/password protection | Yes | |
| ● Copy protection | Yes | |
| ● Block protection | Yes | |
| Access protection | ||
| ● Protection level: Write protection | Yes | |
| ● Protection level: Read/write protection | Yes | |
| ● Protection level: Complete protection | Yes | |
| Cycle time monitoring | ||
| ● lower limit | adjustable minimum cycle time | |
| ● upper limit | adjustable maximum cycle time | |
| Dimensions | ||
| Width | 100 mm | |
| Height | 117 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 310 g | |
| last modified: | 02/01/2017 | |
