ÚvodÚvod
Úvod
  • O nás
    • Základní údaje o společnosti
    • Historie
    • Partnerství a certifikáty
    • Reference
  • Obory
    • Komplexní Automatizace
    • Výrobní Informatika
    • Integrační projekty a průmysl 4.0
    • Dodávky HW
    • Kurzy a školení
    • Servis 24/7
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
  • Hlavní menu
  • Úvod
    • Přihlášení
    • Registrace
    • Zaslat heslo
    Nákupní košík
  • ENG
www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS S7-300/mEC / SIPLUS ET 200M

SIPLUS S7-300 CPU 315F-2DP-25 ... +60 DEGREES CWITH CONFORMAL COATINGBASED ON 6ES7315-6FF04-0AB0.FAILSAFE CPU WITH MPI INTERFACEINTEGRATED 24V DC POWER SUPPLY,384 KB WORKING MEMORY,40MM WIDE,2. INTERFACE DP-MASTER/SLAVEMICRO MEMORY CARD REQUIRED

Kód:
6AG1315-6FF04-2AB0
Skladem:
SIPLUS S7-300 CPU 315F-2DP-25 ... +60 DEGREES CWITH CONFORMAL COATINGBASED ON 6ES7315-6FF04-0AB0.FAILSAFE CPU WITH MPI INTERFACEINTEGRATED 24V DC POWER SUPPLY,384 KB WORKING MEMORY,40MM WIDE,2. INTERFACE DP-MASTER/SLAVEMICRO MEMORY CARD REQUIRED

Technická data

Název:

SIPLUS S7-300 CPU 315F-2DP

Popis:

SIPLUS S7-300 CPU 315F-2DP -25 ... +60 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7315-6FF04-0AB0 . FAILSAFE CPU WITH MPI INTERFACE INTEGRATED 24V DC POWER SUPPLY, 384 KB WORKING MEMORY, 40MM WIDE, 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD REQUIRED

Technické informace:

General information
Hardware product version 01
Firmware version V3.3
Engineering with
● Programming package STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218 + Distributed Safety
Supply voltage
Rated value (DC)
● 24 V DC Yes
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
external protection for power supply lines (recommendation) 2 A min.
Mains buffering
● Mains/voltage failure stored energy time 5 ms
● Repeat rate, min. 1 s
Input current
Current consumption (rated value) 850 mA
Current consumption (in no-load operation), typ. 150 mA
Inrush current, typ. 3.5 A
I²t 1 A²·s
Power loss
Power loss, typ. 4.5 W
Memory
Work memory
● integrated 384 kbyte
● expandable No
● Size of retentive memory for retentive data blocks 128 kbyte
Load memory
● Plug-in (MMC) Yes
● Plug-in (MMC), max. 8 Mbyte
● Data management on MMC (after last programming), min. 10 y
Backup
● present Yes; Guaranteed by MMC (maintenance-free)
● without battery Yes; Program and data
CPU processing times
for bit operations, typ. 0.05 µs
for word operations, typ. 0.09 µs
for fixed point arithmetic, typ. 0.12 µs
for floating point arithmetic, typ. 0.45 µs
CPU-blocks
Number of blocks (total) 1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max. 1 024; Number range: 1 to 16000
● Size, max. 64 kbyte
FB
● Number, max. 1 024; Number range: 0 to 7999
● Size, max. 64 kbyte
FC
● Number, max. 1 024; Number range: 0 to 7999
● Size, max. 64 kbyte
OB
● Description see instruction list
● Size, max. 64 kbyte
● Number of free cycle OBs 1; OB 1
● Number of time alarm OBs 1; OB 10
● Number of delay alarm OBs 2; OB 20, 21
● Number of cyclic interrupt OBs 4; OB 32, 33, 34, 35
● Number of process alarm OBs 1; OB 40
● Number of DPV1 alarm OBs 3; OB 55, 56, 57
● Number of isochronous mode OBs 1; OB 61
● Number of startup OBs 1; OB 100
● Number of asynchronous error OBs 5; OB 80, 82, 85, 86, 87
● Number of synchronous error OBs 2; OB 121, 122
Nesting depth
● per priority class 16
● additional within an error OB 4
Counters, timers and their retentivity
S7 counter
● Number 256
Retentivity
— adjustable Yes
— lower limit 0
— upper limit 255
— preset Z 0 to Z 7
Counting range
— lower limit 0
— upper limit 999
IEC counter
● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)
S7 times
● Number 256
Retentivity
— adjustable Yes
— lower limit 0
— upper limit 255
— preset No retentivity
Time range
— lower limit 10 ms
— upper limit 9 990 s
IEC timer
● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total All, 128 KB max.
Flag
● Number, max. 2 048 byte
● Retentivity available Yes; MB 0 to MB 2047
● Retentivity preset MB 0 to MB 15
● Number of clock memories 8; 1 memory byte
Data blocks
● Number, max. 1 024; Number range: 1 to 16000
● Size, max. 64 kbyte
● Retentivity adjustable Yes; via non-retain property on DB
● Retentivity preset Yes
Local data
● per priority class, max. 32 kbyte; Max. 2 KB per block
Address area
I/O address area
● Inputs 2 048 byte
● Outputs 2 048 byte
of which distributed
— Inputs 2 048 byte
— Outputs 2 048 byte
Process image
● Inputs 2 048 byte
● Outputs 2 048 byte
● Inputs, adjustable 2 048 byte
● Outputs, adjustable 2 048 byte
● Inputs, default 384 byte
● Outputs, default 384 byte
Subprocess images
● Number of subprocess images, max. 1
Digital channels
● Inputs 16 384
— of which central 1 024
● Outputs 16 384
— of which central 1 024
Analog channels
● Inputs 1 024
— of which central 256
● Outputs 1 024
— of which central 256
Hardware configuration
Number of expansion units, max. 3
Number of DP masters
● integrated 1
● via CP 4
Number of operable FMs and CPs (recommended)
● FM 8
● CP, PtP 8
● CP, LAN 10
Rack
● Racks, max. 4
● Modules per rack, max. 8
Time of day
Clock
● Hardware clock (real-time) Yes
● retentive and synchronizable Yes
● Backup time 6 wk; At 40 °C ambient temperature
● Deviation per day, max. 10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number 1
● Number/Number range 0
● Range of values 0 to 2^31 hours (when using SFC 101)
● Granularity 1 hour
● retentive Yes; Must be restarted at each restart
Clock synchronization
● supported Yes
● to MPI, master Yes
● to MPI, slave Yes
● to DP, master Yes; With DP slave only slave clock
● to DP, slave Yes
● in AS, master Yes
● in AS, slave No
Digital inputs
Number of digital inputs 0
Digital outputs
Number of digital outputs 0
Analog inputs
Number of analog inputs 0
Analog outputs
Number of analog outputs 0
Interfaces
Number of industrial Ethernet interfaces 0
Number of RS 485 interfaces 2
Number of RS 422 interfaces 0
1. Interface
Interface type Integrated RS 485 interface
Physics RS 485
Isolated No
Power supply to interface (15 to 30 V DC), max. 200 mA
Functionality
● MPI Yes
● PROFIBUS DP master No
● PROFIBUS DP slave No
● Point-to-point connection No
MPI
● Transmission rate, max. 187.5 kbit/s
Services
— PG/OP communication Yes
— Routing Yes
— Global data communication Yes
— S7 basic communication Yes
— S7 communication Yes; Only server, configured on one side
— S7 communication, as client No
— S7 communication, as server Yes
2. Interface
Interface type Integrated RS 485 interface
Physics RS 485
Isolated Yes
Power supply to interface (15 to 30 V DC), max. 200 mA
Functionality
● MPI No
● PROFIBUS DP master Yes
● PROFIBUS DP slave Yes
● Point-to-point connection No
DP master
● Transmission rate, max. 12 Mbit/s
● Number of DP slaves, max. 124; Per station
Services
— PG/OP communication Yes
— Routing Yes
— Global data communication No
— S7 basic communication Yes; I blocks only
— S7 communication Yes; Only server, configured on one side
— S7 communication, as client No
— S7 communication, as server Yes
— Equidistance Yes
— Isochronous mode Yes; OB 61
— SYNC/FREEZE Yes
— Activation/deactivation of DP slaves Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max. 8
— DPV1 Yes
Address area
— Inputs, max. 2 048 byte
— Outputs, max. 2 048 byte
User data per DP slave
— Inputs, max. 244 byte
— Outputs, max. 244 byte
DP slave
● GSD file The latest GSD file is available at: http://www.siemens.com/profibus-gsd
● Transmission rate, max. 12 Mbit/s
● automatic baud rate search Yes; only with passive interface
● Address area, max. 32
● User data per address area, max. 32 byte
Services
— PG/OP communication Yes
— Routing Yes; Only with active interface
— Global data communication No
— S7 basic communication No
— S7 communication Yes; Only server, configured on one side
— S7 communication, as client No
— S7 communication, as server Yes
— Direct data exchange (slave-to-slave communication) Yes
— DPV1 No
Transfer memory
— Inputs 244 byte
— Outputs 244 byte
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Communication functions
PG/OP communication Yes
Data record routing Yes
Global data communication
● supported Yes
● Number of GD loops, max. 8
● Number of GD packets, max. 8
● Number of GD packets, transmitter, max. 8
● Number of GD packets, receiver, max. 8
● Size of GD packets, max. 22 byte
● Size of GD packet (of which consistent), max. 22 byte
S7 basic communication
● supported Yes
● User data per job, max. 76 byte
● User data per job (of which consistent), max. 76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported Yes
● as server Yes
● as client Yes; Via CP and loadable FB
● User data per job, max. 180 byte; With PUT/GET
● User data per job (of which consistent), max. 240 byte; as server
S5 compatible communication
● supported Yes; via CP and loadable FC
Number of connections
● overall 16
● usable for PG communication 15
— reserved for PG communication 1
— adjustable for PG communication, min. 1
— adjustable for PG communication, max. 15
● usable for OP communication 15
— reserved for OP communication 1
— adjustable for OP communication, min. 1
— adjustable for OP communication, max. 15
● usable for S7 basic communication 12
— reserved for S7 basic communication 0
— adjustable for S7 basic communication, min. 0
— adjustable for S7 basic communication, max. 12
S7 message functions
Number of login stations for message functions, max. 16; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages Yes
simultaneously active Alarm-S blocks, max. 300
Test commissioning functions
Status block Yes; Up to 2 simultaneously
Single step Yes
Number of breakpoints 4
Status/control
● Status/control variable Yes
● Variables Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max. 30
— of which status variables, max. 30
— of which control variables, max. 14
Forcing
● Forcing Yes
● Forcing, variables Inputs, outputs
● Number of variables, max. 10
Diagnostic buffer
● present Yes
● Number of entries, max. 500
— adjustable No
— of which powerfail-proof 100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.
— can be set Yes; From 10 to 499
— preset 10
Service data
● can be read out Yes
Standards, approvals, certificates
CE mark Yes
UL approval Yes; File E239877
FM approval Yes; CofC 3028431
RCM (formerly C-TICK) Yes
KC approval Yes
EAC (formerly Gost-R) Yes
Railway application
● EN 50155 No
Use in hazardous areas
● ATEX Yes
Ambient conditions
Ambient temperature during operation
● min. -25 °C
● max. 60 °C
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3 Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3 Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Configuration software
● STEP 7 Yes; V5.2 SP1 or higher with HW update
Programming
● Command set see instruction list
● Nesting levels 8
● System functions (SFC) see instruction list
● System function blocks (SFB) see instruction list
Programming language
— LAD Yes
— FBD Yes
— STL Yes
— SCL Yes
— CFC Yes
— GRAPH Yes
— HiGraph® Yes
Know-how protection
● User program protection/password protection Yes
● Block encryption Yes; With S7 block Privacy
Dimensions
Width 40 mm
Height 125 mm
Depth 130 mm
Weights
Weight, approx. 290 g
last modified: 02/01/2017
Poslat tip známému

Vyplněním tohoto formuláře můžete dát vědět svému známému o tomto výrobku.

Ochrana osobních údajů
Kde jste: www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-300 > SIPLUS S7-300/mEC / SIPLUS ET 200M
MENU
Úvod

Facebook LinkeIn

  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop

SIDAT, spol. s r. o., Jinonická 80, 158 00 Praha  | Staré náměstí 9/8, 619 00 Brno

info@sidat.cz | www.sidat.cz | Ochrana osobních údajů | Cookies

2021 ©  SIDAT automation & informatics, Všechna práva vyhrazena
Provozováno na m@gnetpro
  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
      • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
      • Elektronické/komunikaci podporující spínací přístroje
      • Transformátory, zdroje, tlumivky
      • Siplus
        • SIPLUS Extreme LOGO
        • SIPLUS Extreme ostatní
        • SIPLUS Extreme S7-200/1200
        • SIPLUS Extreme S7-300
          • SIPLUS ET 200 SP
          • SIPLUS ET 200 SP
          • SIPLUS S7-300/mEC / SIPLUS ET 200M
        • SIPLUS Extreme S7-400/1500
        • SIPLUS HCS
        • SIPLUS RIC
        • SIPLUS CMS / HCS / ECC
        • SIPLUS SIDOOR
        • SIPLUS Customized Products
      • Vypínače, odpínače a výkonové jističe
      • Průmyslové rozváděče, skříně, přípojnicové systémy
      • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
      • Vypínače a zásuvky, modulové přístroje
      • Rozvodnice, rozváděče, řadové svornice
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
Zavřít okno

Vážený zákazníku,

děkujeme za Váš zájem o naše služby, ale tato verze e-shopu není podporována, aktuálně je vyvíjena nová, do níž zatím není možné se registrovat. Registrace provedená zde je automaticky reportována obchodnímu oddělení, které Vaše kontakty vnáší do systému a tudíž na Vaše podněty bude neprodleně reagovat. Pro zjištění disponibility a ceny komponent zde uvedených (i neuvedených) Vám však doporučujeme dočasně kontaktovat obchodní oddělení prostřednictvím e-mailu (obchod@sidat.cz) či telefonicky (tel. 257 187 920), rádi se budeme Vašemu požadavku individuálně věnovat.

Omlouváme se za případné komplikace, děkujeme za pochopení a těšíme se na další spolupráci!

Váš tým SIDAT.