Technická data
Název:
SIPLUS S7-300 FM350-2
Popis:
SIPLUS S7-300 FM350-2 8 CHANNEL FOR MEDIAL STRESS WITH CONFORMAL COATING BASED ON 6ES7350-2AH01-0AE0 . COUNTER MODULE FM 350-2, 8 CHANNELS, 20 KHZ, 24V ENCODER FOR COUNTING, MEASURING FREQUENCIES, SPEED MEASUREMENT, PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD
Technické informace:
| Supply voltage | ||
| Auxiliary voltage 1L+, load voltage 2L+ | ||
| ● Rated value (DC) | 24 V | |
| ● permissible range, lower limit (DC) | 20.4 V | |
| ● permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from load voltage L+ (without load), max. | 150 mA | |
| from backplane bus 5 V DC, max. | 100 mA | |
| Encoder supply | ||
| Type of output voltage | NAMUR-encoder supply: 8.2 V +/-2% | |
| Short-circuit protection | Yes | |
| Output current | ||
| ● Rated value | 200 mA | |
| Power loss | ||
| Power loss, typ. | 10 W | |
| Digital inputs | ||
| Number of digital inputs | 8 | |
| Number of NAMUR inputs | 8 | |
| Functions | 1 each for gate start/ gate stop | |
| Input voltage | ||
| ● for signal "0" | -3 to +5V | |
| ● for signal "1" | 11 to 30.2 V | |
| Input current | ||
| ● for signal "0", max. (permissible quiescent current) | 2 mA | |
| ● for signal "1", typ. | 9 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| — at "0" to "1", max. | 50 µs | |
| Cable length | ||
| ● shielded, max. | 100 m | |
| Digital outputs | ||
| Number of digital outputs | 8 | |
| Short-circuit protection | Yes | |
| Limitation of inductive shutdown voltage to | L+ (-40 V) | |
| Output voltage | ||
| ● for signal "1", min. | L+ (-0.8 V) | |
| Output current | ||
| ● for signal "1" rated value | 0.5 A | |
| ● for signal "0" residual current, max. | 0.5 mA | |
| Output delay with resistive load | ||
| ● "0" to "1", max. | 300 µs | |
| Switching frequency | ||
| ● with resistive load, max. | 500 Hz | |
| ● with inductive load, max. | 0.5 Hz | |
| Total current of the outputs (per group) | ||
| horizontal installation | ||
| — up to 40 °C, max. | 4 A | |
| — up to 60 °C, max. | 2 A | |
| all other mounting positions | ||
| — up to 40 °C, max. | 2 A | |
| Cable length | ||
| ● shielded, max. | 600 m | |
| ● unshielded, max. | 100 m | |
| Encoder | ||
| Connectable encoders | ||
| ● Incremental encoder (asymmetrical) | Yes | |
| ● 24 V initiator | Yes | |
| ● 24 V directional element | Yes | |
| ● NAMUR encoder | Yes | |
| ● 2-wire sensor | Yes | |
| NAMUR encoder | ||
| ● Input signal | to DIN 19 234 | |
| ● Input current for signal "0", max. | 1.2 mA | |
| ● Input current for signal "1", min. | 2.1 mA | |
| ● Input delay, max. | 50 µs | |
| ● Input frequency, max. | 20 kHz | |
| ● Cable length, shielded, max. | 100 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostic functions | Yes; Diagnostic information readable | |
| Alarms | ||
| ● Diagnostic alarm | Yes; Parameterizable | |
| ● Hardware interrupt | Yes; Parameterizable | |
| Diagnostics indication LED | ||
| ● Group error SF (red) | Yes | |
| Counter | ||
| Counter input 24 V | ||
| ● Number | 8; 32 bit or ±31 bit | |
| ● Input voltage for signal "0" | -3 to +5V | |
| ● Input voltage for signal "1" | 11 to 30.2 V | |
| ● Input current for signal "0", max. (permissible quiescent current) | 2 mA | |
| ● Input current for signal "1", typ. | 9 mA | |
| ● Input delay, max. | 50 µs | |
| ● Counting frequency, max. | 20 kHz; Incremental encoder: 10 kHz | |
| ● Cable length, max. | 100 m | |
| Potential separation | ||
| Potential separation digital inputs | ||
| ● between the channels and backplane bus | Yes; and shielding | |
| Potential separation digital outputs | ||
| ● between the channels and backplane bus | Yes; and shielding | |
| Potential separation counter | ||
| ● between the channels and backplane bus | Yes; and shielding | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes; File E239877 | |
| FM approval | Yes | |
| RCM (formerly C-TICK) | Yes | |
| KC approval | Yes | |
| EAC (formerly Gost-R) | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | 0 °C; = Tmin | |
| ● max. | 60 °C; = Tmax | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | 1x 40-pin | |
| Dimensions | ||
| Width | 80 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weights | ||
| Weight, approx. | 460 g | |
| last modified: | 02/01/2017 | |
