Technická data
Název:
SIPLUS SM322 8DA - Relais
Popis:
SIPLUS S7-300 SM322 - 40-POLE -25 ... +60 DGR C WITH CONFORMAL COATING CONFORMITY WITH EN50155 T1 CAT 1 CL A/B BASED ON 6ES7322-1HF10-0AA0 . DIGITAL OUTPUT OPTIC. ISOLATED 8 DO (RELAY), 1 X 40-POLE, 24V DC, 5A OR AC 230V, 5A, CONNECT. WITH SPRING TERMINALS CAN BE USED WITH 6ES7392-1BM01-0AA0 AN HIGHER
Technické informace:
| Supply voltage | ||
| Load voltage L+ | ||
| ● Rated value (DC) | 120 V | |
| Load voltage L1 | ||
| ● Rated value (AC) | 230 V | |
| Input current | ||
| from supply voltage L+, max. | 125 mA | |
| from backplane bus 5 V DC, max. | 40 mA | |
| Power loss | ||
| Power loss, typ. | 4.2 W | |
| Digital outputs | ||
| Number of digital outputs | 8; Relays | |
| Switching capacity of the outputs | ||
| ● on lamp load, max. | 1 500 W; 230 V AC | |
| Output current | ||
| ● for signal "1" rated value | 5 A | |
| ● for signal "1" minimum load current | 5 mA | |
| Switching frequency | ||
| ● with resistive load, max. | 2 Hz | |
| ● with inductive load, max. | 0.5 Hz | |
| ● on lamp load, max. | 2 Hz | |
| ● mechanical, max. | 10 Hz | |
| Total current of the outputs (per group) | ||
| horizontal installation | ||
| — up to 60 °C, max. | 5 A | |
| — up to 70 °C, max. | 5 A | |
| vertical installation | ||
| — up to 40 °C, max. | 5 A | |
| Relay outputs | ||
| ● Rated supply voltage of relay coil L+ (DC) | 24 V | |
| ● Number of operating cycles, max. | 300 000; 300000 (24 V DC, at 2 A); 200000 (120 V AC, at 3 A); 100000 (230 V AC, at 3 A) | |
| Switching capacity of contacts | ||
| — with inductive load, max. | 3 A; 3 A (230 V DC), 2 A (24 V AC) | |
| — with resistive load, max. | 8 A; 8 A (230 V DC), 5 A (24 V AC) | |
| Cable length | ||
| ● shielded, max. | 1 000 m | |
| ● unshielded, max. | 600 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostic functions | No | |
| Alarms | ||
| ● Diagnostic alarm | No | |
| Diagnostic messages | ||
| ● Wire-break | No | |
| ● Short-circuit | No | |
| ● Fuse blown | No | |
| ● missing load voltage | No | |
| Diagnostics indication LED | ||
| ● Rated load voltage PWR (green) | No | |
| ● Fuse OK FSG (green) | No | |
| ● Status indicator digital output (green) | Yes | |
| Potential separation | ||
| Potential separation digital outputs | ||
| ● between the channels | Yes | |
| ● between the channels, in groups of | 1 | |
| ● between the channels and backplane bus | Yes; Optocoupler | |
| Isolation | ||
| Isolation tested with | 2000 V AC | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes; File E239877 | |
| FM approval | Yes; CofC 3028431 | |
| RCM (formerly C-TICK) | Yes | |
| KC approval | Yes | |
| EAC (formerly Gost-R) | Yes | |
| Railway application | ||
| ● EN 50155 | Yes; T1 Category 1 Class A/B horizontal mounting position | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -25 °C | |
| ● max. | 60 °C | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | 40-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weights | ||
| Weight, approx. | 320 g | |
| last modified: | 02/01/2017 | |
