Technická data
Název:
SIPLUS SM331 8AI - 40pol
Popis:
SIPLUS S7-300 SM331 8AI 40-POLE -25 ... +60 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7NF10-0AB0 . ANALOG INPUT OPTICALLY ISOLATED, 8 AE; +/-5/10V, 1-5 V, +/-20MA, 0/4 TO 20MA, 16 BIT, 1 COMMON POINT(60 V COM.), 4 CHANNEL MODE: 10 MS, 8 CHANNEL MODE: 23-95 MS, 1 X 40 PIN
Technické informace:
| Supply voltage | ||
| Load voltage L+ | ||
| ● Rated value (DC) | 24 V | |
| ● Reverse polarity protection | Yes | |
| Input current | ||
| from load voltage L+ (without load), max. | 200 mA | |
| from backplane bus 5 V DC, max. | 100 mA | |
| Power loss | ||
| Power loss, typ. | 3 W | |
| Analog inputs | ||
| Number of analog inputs | 8 | |
| permissible input voltage for voltage input (destruction limit), max. | 75 V; 35 V continuous, 75 V for max. 1 s (mark to space ratio 1:20) | |
| permissible input current for current input (destruction limit), max. | 40 mA | |
| Input ranges | ||
| ● Voltage | Yes | |
| ● Current | Yes | |
| ● Thermocouple | No | |
| ● Resistance thermometer | No | |
| ● Resistance | No | |
| Input ranges (rated values), voltages | ||
| ● 0 to +10 V | No | |
| ● 1 V to 5 V | Yes | |
| ● Input resistance (1 V to 5 V) | 10 MΩ | |
| ● 1 V to 10 V | No | |
| ● -1 V to +1 V | No | |
| ● -10 V to +10 V | Yes | |
| ● Input resistance (-10 V to +10 V) | 10 MΩ | |
| ● -2.5 V to +2.5 V | No | |
| ● -250 mV to +250 mV | No | |
| ● -5 V to +5 V | Yes | |
| ● Input resistance (-5 V to +5 V) | 10 MΩ | |
| ● -50 mV to +50 mV | No | |
| ● -500 mV to +500 mV | No | |
| ● -80 mV to +80 mV | No | |
| Input ranges (rated values), currents | ||
| ● 0 to 20 mA | Yes | |
| ● Input resistance (0 to 20 mA) | 250 Ω | |
| ● -20 mA to +20 mA | Yes | |
| ● Input resistance (-20 mA to +20 mA) | 250 Ω | |
| ● -3.2 mA to +3.2 mA | No | |
| ● 4 mA to 20 mA | Yes | |
| ● Input resistance (4 mA to 20 mA) | 250 Ω | |
| Input ranges (rated values), thermocouples | ||
| ● Type B | No | |
| ● Type C | No | |
| ● Type E | No | |
| ● Type J | No | |
| ● Type K | No | |
| ● Type L | No | |
| ● Type N | No | |
| ● Type R | No | |
| ● Type S | No | |
| ● Type T | No | |
| ● Type U | No | |
| ● Type TXK/TXK(L) to GOST | No | |
| Input ranges (rated values), resistance thermometer | ||
| ● Cu 10 | No | |
| ● Ni 100 | No | |
| ● Ni 1000 | No | |
| ● LG-Ni 1000 | No | |
| ● Ni 120 | No | |
| ● Ni 200 | No | |
| ● Ni 500 | No | |
| ● Pt 100 | No | |
| ● Pt 1000 | No | |
| ● Pt 200 | No | |
| ● Pt 500 | No | |
| Input ranges (rated values), resistors | ||
| ● 0 to 150 ohms | No | |
| ● 0 to 300 ohms | No | |
| ● 0 to 600 ohms | No | |
| ● 0 to 6000 ohms | No | |
| Cable length | ||
| ● shielded, max. | 200 m | |
| Analog value generation for the inputs | ||
| Measurement principle | integrating | |
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 16 bit; Unipolar: 15/15/15/15 bit; bipolar: 15 bit + sign/15 bit + sign/15 bit + sign/15 bit + sign | |
| ● Integration time, parameterizable | Yes; 23 / 72 / 83 / 95 ms | |
| ● Basic conversion time (ms) | 10 ms (4-channel mode); 95/83/72/23 ms (8-channel mode) | |
| ● Interference voltage suppression for interference frequency f1 in Hz | 400 / 60 / 50 Hz, combinations of 400, 60, 50 Hz | |
| Encoder | ||
| Connection of signal encoders | ||
| ● for current measurement as 2-wire transducer | Yes; with external transmitter, current supply; possible with separate supply for transmitter | |
| ● for current measurement as 4-wire transducer | Yes | |
| Errors/accuracies | ||
| Operational error limit in overall temperature range | ||
| ● Voltage, relative to input range, (+/-) | 0.1 %; @ 0 ... +60 °C; +/-0.2% @ -25 ... +60 °C | |
| ● Current, relative to input range, (+/-) | 0.1 %; @ 0 ... +60 °C; +/-0.2% @ -25 ... +60 °C | |
| Basic error limit (operational limit at 25 °C) | ||
| ● Voltage, relative to input range, (+/-) | 0.05 % | |
| ● Current, relative to input range, (+/-) | 0.05 % | |
| Interrupts/diagnostics/status information | ||
| Diagnostic functions | Yes; Parameterizable | |
| Alarms | ||
| ● Diagnostic alarm | Yes; Parameterizable | |
| ● Limit value alarm | Yes; Parameterizable all channels (end of cycle interrupt is also supported across modules) | |
| Diagnostic messages | ||
| ● Diagnostic information readable | Yes | |
| Diagnostics indication LED | ||
| ● Group error SF (red) | Yes | |
| Potential separation | ||
| Potential separation analog inputs | ||
| ● between the channels and backplane bus | Yes | |
| Isolation | ||
| Isolation tested with | 500 V AC | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes; File E239877 | |
| FM approval | Yes; CofC 3028431 | |
| RCM (formerly C-TICK) | Yes | |
| KC approval | Yes | |
| EAC (formerly Gost-R) | Yes | |
| Railway application | ||
| ● EN 50121-4 | No | |
| ● EN 50155 | No | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -25 °C; = Tmin | |
| ● max. | 60 °C; = Tmax | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | 40-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weights | ||
| Weight, approx. | 272 g | |
| last modified: | 02/01/2017 | |
