Technická data
Název:
SIPLUS S7-300 SM332 4AA
Popis:
SIPLUS S7-300 SM332 4AO WITH CONFORMAL COATING BASED ON 6ES7332-7ND02-0AB0 . ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION, 4 AO, 16 BIT RESOLUTION, 0-10V, 1-5V, +/-10V, +/-20MA, 0/4 - 20MA, 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE
Technické informace:
| Supply voltage | ||
| Load voltage L+ | ||
| ● Rated value (DC) | 24 V | |
| ● Reverse polarity protection | Yes | |
| Input current | ||
| from load voltage L+ (without load), max. | 290 mA | |
| from backplane bus 5 V DC, max. | 120 mA | |
| Power loss | ||
| Power loss, typ. | 3 W | |
| Analog outputs | ||
| Number of analog outputs | 4; Isochronous mode | |
| Voltage output, short-circuit protection | Yes | |
| Voltage output, short-circuit current, max. | 40 mA | |
| Current output, no-load voltage, max. | 18 V | |
| Output ranges, voltage | ||
| ● 0 to 10 V | Yes | |
| ● 1 V to 5 V | Yes | |
| ● -10 V to +10 V | Yes | |
| Output ranges, current | ||
| ● 0 to 20 mA | Yes | |
| ● -20 mA to +20 mA | Yes | |
| ● 4 mA to 20 mA | Yes | |
| Load impedance (in rated range of output) | ||
| ● with voltage outputs, min. | 1 kΩ | |
| ● with voltage outputs, capacitive load, max. | 1 µF | |
| ● with current outputs, max. | 500 Ω | |
| ● with current outputs, inductive load, max. | 1 mH | |
| Cable length | ||
| ● shielded, max. | 200 m | |
| Analog value generation for the outputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 16 bit | |
| ● Conversion time (per channel) | 200 µs; in isochronous mode 640 µs | |
| Settling time | ||
| ● for resistive load | 0.2 ms | |
| ● for capacitive load | 3.3 ms | |
| ● for inductive load | 0.5 ms | |
| Errors/accuracies | ||
| Operational error limit in overall temperature range | ||
| ● Voltage, relative to output range, (+/-) | 0.12 % | |
| ● Current, relative to output range, (+/-) | 0.18 % | |
| Basic error limit (operational limit at 25 °C) | ||
| ● Voltage, relative to output range, (+/-) | 0.02 % | |
| ● Current, relative to output range, (+/-) | 0.02 % | |
| Interrupts/diagnostics/status information | ||
| Substitute values connectable | Yes; Parameterizable | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| Diagnostics indication LED | ||
| ● Group error SF (red) | Yes | |
| Potential separation | ||
| Potential separation analog outputs | ||
| ● between the channels and backplane bus | Yes | |
| Isolation | ||
| Isolation tested with | 1500 V DC | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes; File E239877 | |
| FM approval | Yes | |
| RCM (formerly C-TICK) | Yes | |
| KC approval | Yes | |
| EAC (formerly Gost-R) | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | 0 °C; = Tmin | |
| ● max. | 60 °C; = Tmax | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | 20-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weights | ||
| Weight, approx. | 220 g | |
| last modified: | 02/01/2017 | |
