Technická data
Název:
SIPLUS S7-300 SM334 4AE 2AA
Popis:
SIPLUS S7-300 SM334 4AI 2AO -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7334-0KE00-0AB0 . ANALOG MODULE OPTICALLY ISOLATED, 4AE/2AA, 12 BIT, 0-10V F. PT100 (CLIMAT RANGE -120 - 155 DEGR.) AND 10 KOHM MEASURING RANGE, 1 X 20 PIN
Technické informace:
| Supply voltage | ||
| Load voltage L+ | ||
| ● Rated value (DC) | 24 V | |
| ● Reverse polarity protection | Yes | |
| Input current | ||
| from supply and load voltage L+ (without load), max. | 80 mA | |
| from backplane bus 5 V DC, max. | 60 mA | |
| Power loss | ||
| Power loss, typ. | 2 W | |
| Analog inputs | ||
| Number of analog inputs | 4 | |
| ● For voltage measurement | 2 | |
| ● For resistance measurement | 4 | |
| permissible input voltage for voltage input (destruction limit), max. | 20 V; continuous; 75 V for max. 1 s (mark to space ratio 1:20) | |
| Cycle time (all channels) max. | 85 ms | |
| Input ranges | ||
| ● Voltage | Yes | |
| ● Current | No | |
| ● Thermocouple | No | |
| ● Resistance thermometer | Yes | |
| ● Resistance | Yes | |
| Input ranges (rated values), voltages | ||
| ● 0 to +10 V | Yes | |
| ● Input resistance (0 to 10 V) | 100 kΩ | |
| Input ranges (rated values), resistance thermometer | ||
| ● Pt 100 | Yes; only climatic range | |
| Input ranges (rated values), resistors | ||
| ● 0 to 10000 ohms | Yes | |
| Analog outputs | ||
| Number of analog outputs | 2 | |
| Voltage output, short-circuit protection | Yes | |
| Voltage output, short-circuit current, max. | 10 mA | |
| Output ranges, voltage | ||
| ● 0 to 10 V | Yes | |
| Load impedance (in rated range of output) | ||
| ● with voltage outputs, min. | 2.5 kΩ | |
| ● with voltage outputs, capacitive load, max. | 1 µF | |
| Cable length | ||
| ● shielded, max. | 100 m | |
| Analog value generation for the inputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 12 bit | |
| ● Integration time (ms) | 16,67 / 20 ms | |
| Analog value generation for the outputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 12 bit | |
| Settling time | ||
| ● for resistive load | 0.8 ms | |
| ● for capacitive load | 0.8 ms | |
| Encoder | ||
| Connection of signal encoders | ||
| ● for resistance measurement with two-wire connection | Yes | |
| ● for resistance measurement with three-wire connection | Yes | |
| ● for resistance measurement with four-wire connection | Yes | |
| Errors/accuracies | ||
| Operational error limit in overall temperature range | ||
| ● Voltage, relative to input range, (+/-) | 0.8 %; 0 to 10V | |
| ● Resistance, relative to input range, (+/-) | 3.7 %; 10 kOhm | |
| ● Resistance thermometer, relative to input range, (+/-) | 1.1 % | |
| ● Voltage, relative to output range, (+/-) | 1.1 % | |
| Basic error limit (operational limit at 25 °C) | ||
| ● Voltage, relative to input range, (+/-) | 0.5 %; 0 to 10V | |
| ● Resistance, relative to input range, (+/-) | 2.8 %; 10 kOhm | |
| ● Resistance thermometer, relative to input range, (+/-) | 0.8 % | |
| ● Voltage, relative to output range, (+/-) | 0.85 % | |
| Interrupts/diagnostics/status information | ||
| Alarms | No | |
| Diagnostic functions | No | |
| Potential separation | ||
| Potential separation analog inputs | ||
| ● between the channels and backplane bus | Yes | |
| Potential separation analog outputs | ||
| ● between the channels and backplane bus | Yes | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| UL approval | Yes; File E239877 | |
| FM approval | Yes | |
| RCM (formerly C-TICK) | Yes | |
| KC approval | Yes | |
| EAC (formerly Gost-R) | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -25 °C; = Tmin | |
| ● max. | 70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| required front connector | 20-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 117 mm | |
| Weights | ||
| Weight, approx. | 200 g | |
| last modified: | 02/01/2017 | |
