Technická data
Název:
SIPLUS S7-1500 DQ 16x48VUC/125VDC ST
Popis:
SIPLUS S7-1500 DQ 16x48VUC/125V -40 ... +70 DEG C STARTUP -25 DEG C WITH CONFORMAL COATING BASED ON 6ES7522-5EH00-0AB0 . DQ16 X 24...48VUC/125VDC/0.5A; 16 CHANNELS IN GROUPS OF 1, 0.5A PER GROUP; SUBSTITUTE VALUE; PLEASE NOTE DERATING
Technické informace:
General information | ||
Product type designation | DQ 16x24 ... 48VUC/125VDC/0.5A ST | |
Product function | ||
● I&M data | Yes; I&M0 to I&M3 | |
Operating mode | ||
● DQ | Yes | |
● MSO | Yes | |
Output voltage | ||
Rated value (DC) | 24 V; 48 V, 125 V | |
Rated value (AC) | 24 V; 48 V (50 - 60 Hz) | |
Power | ||
Power available from the backplane bus | 2 W | |
Power loss | ||
Power loss, typ. | 3.8 W | |
Digital outputs | ||
Number of digital outputs | 16 | |
Current-sinking | Yes | |
Current-sourcing | Yes | |
Limitation of inductive shutdown voltage to | 200 V (suppressor diode) | |
Controlling a digital input | Yes | |
Switching capacity of the outputs | ||
● with resistive load, max. | 0.5 A | |
● on lamp load, max. | 40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC | |
Output voltage | ||
● for signal "1", min. | L+ (-1.0 V) | |
Output current | ||
● for signal "1" rated value | 0.5 A | |
● for signal "1" permissible range, max. | 0.6 A | |
Output delay with resistive load | ||
● "0" to "1", max. | 5 ms | |
● "1" to "0", max. | 5 ms | |
Parallel switching of two outputs | ||
● for logic links | Yes | |
● for uprating | No | |
● for redundant control of a load | Yes | |
Switching frequency | ||
● with resistive load, max. | 25 Hz | |
● with inductive load, max. | 0.5 Hz | |
● on lamp load, max. | 10 Hz | |
Total current of the outputs | ||
● Current per channel, max. | 0.5 A | |
● Current per group, max. | 0.5 A | |
● Current per module, max. | 8 A | |
Cable length | ||
● shielded, max. | 1 000 m | |
● unshielded, max. | 600 m | |
Interrupts/diagnostics/status information | ||
Substitute values connectable | Yes | |
Diagnostics indication LED | ||
● RUN LED | Yes; Green LED | |
● ERROR LED | Yes; Red LED | |
● Channel status display | Yes; Green LED | |
● for module diagnostics | Yes; Red LED | |
Potential separation | ||
Potential separation channels | ||
● between the channels | Yes | |
● between the channels, in groups of | 1 | |
● between the channels and backplane bus | Yes | |
Permissible potential difference | ||
between different circuits | 125 V DC/48 V AC | |
Isolation | ||
Isolation tested with | 1 200 V DC | |
Ambient conditions | ||
Ambient temperature during operation | ||
● horizontal installation, min. | -40 °C; = Tmin | |
● horizontal installation, max. | 70 °C; = Tmax; > +60 °C max. 0.25 A per output | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Decentralized operation | ||
Prioritized startup | Yes | |
Dimensions | ||
Width | 35 mm | |
Height | 147 mm | |
Depth | 129 mm | |
Weights | ||
Weight, approx. | 230 g | |
last modified: | 02/01/2017 |