Technická data
Název:
SIPLUS S7-1500 AI 8XU/I/RTD/TC ST
Popis:
SIPLUS S7-1500 AI 8XU/I/RTD/TC -40 ... +70 DEGREES C Startup -25°C WITH CONFORMAL COATING BASED ON 6ES7531-7KF00-0AB0 . ANALOG INPUT MODULE 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 8 CHANNELS IN GROUPS OF 8; COMMON MODE VOLTAGE APPR. 10 V; DIAGNOSIS, PROCESSALARMS INCL. INFEED ELEMENT, SHIELD CLAMP AND SHIELD TERMINAL
Technické informace:
| General information | ||
| Product type designation | AI 8xU/I/RTD/TC ST | |
| HW functional status | E01 | |
| Firmware version | V1.0.0 | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| Engineering with | ||
| ● STEP 7 TIA Portal configurable/integrated as of version | V12 / V12 | |
| ● STEP 7 configurable/integrated as of version | V5.5 SP3 / - | |
| CiR – Configuration in RUN | ||
| Reparameterization possible in RUN | Yes | |
| Calibration possible in RUN | Yes | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Input current | ||
| Current consumption, max. | 240 mA; with 24 V DC supply | |
| Encoder supply | ||
| 24 V encoder supply | ||
| ● Short-circuit protection | Yes | |
| ● Output current, max. | 53 mA | |
| Power | ||
| Power available from the backplane bus | 0.7 W | |
| Power loss | ||
| Power loss, typ. | 2.7 W | |
| Analog inputs | ||
| Number of analog inputs | 8 | |
| ● For current measurement | 8 | |
| ● For voltage measurement | 8 | |
| ● For resistance/resistance thermometer measurement | 4 | |
| ● For thermocouple measurement | 8 | |
| permissible input voltage for voltage input (destruction limit), max. | 28.8 V | |
| permissible input current for current input (destruction limit), max. | 40 mA | |
| Technical unit for temperature measurement adjustable | Yes; °C/°F/K | |
| Input ranges (rated values), voltages | ||
| ● 1 V to 5 V | Yes | |
| ● Input resistance (1 V to 5 V) | 100 kΩ | |
| ● -1 V to +1 V | Yes | |
| ● Input resistance (-1 V to +1 V) | 10 MΩ | |
| ● -10 V to +10 V | Yes | |
| ● Input resistance (-10 V to +10 V) | 100 kΩ | |
| ● -2.5 V to +2.5 V | Yes | |
| ● Input resistance (-2.5 V to +2.5 V) | 10 MΩ | |
| ● -250 mV to +250 mV | Yes | |
| ● Input resistance (-250 mV to +250 mV) | 10 MΩ | |
| ● -5 V to +5 V | Yes | |
| ● Input resistance (-5 V to +5 V) | 100 kΩ | |
| ● -50 mV to +50 mV | Yes | |
| ● Input resistance (-50 mV to +50 mV) | 10 MΩ | |
| ● -500 mV to +500 mV | Yes | |
| ● Input resistance (-500 mV to +500 mV) | 10 MΩ | |
| ● -80 mV to +80 mV | Yes | |
| ● Input resistance (-80 mV to +80 mV) | 10 MΩ | |
| Input ranges (rated values), currents | ||
| ● 0 to 20 mA | Yes | |
| ● Input resistance (0 to 20 mA) | 25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC | |
| ● -20 mA to +20 mA | Yes | |
| ● Input resistance (-20 mA to +20 mA) | 25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC | |
| ● 4 mA to 20 mA | Yes | |
| ● Input resistance (4 mA to 20 mA) | 25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC | |
| Input ranges (rated values), thermocouples | ||
| ● Type B | Yes | |
| ● Input resistance (Type B) | 10 MΩ | |
| ● Type E | Yes | |
| ● Input resistance (Type E) | 10 MΩ | |
| ● Type J | Yes | |
| ● Input resistance (type J) | 10 MΩ | |
| ● Type K | Yes | |
| ● Input resistance (Type K) | 10 MΩ | |
| ● Type N | Yes | |
| ● Input resistance (Type N) | 10 MΩ | |
| ● Type R | Yes | |
| ● Input resistance (Type R) | 10 MΩ | |
| ● Type S | Yes | |
| ● Input resistance (Type S) | 10 MΩ | |
| ● Type T | Yes | |
| ● Input resistance (Type T) | 10 MΩ | |
| Input ranges (rated values), resistance thermometer | ||
| ● Ni 100 | Yes; Standard/climate | |
| ● Input resistance (Ni 100) | 10 MΩ | |
| ● Ni 1000 | Yes; Standard/climate | |
| ● Input resistance (Ni 1000) | 10 MΩ | |
| ● LG-Ni 1000 | Yes; Standard/climate | |
| ● Input resistance (LG-Ni 1000) | 10 MΩ | |
| ● Pt 100 | Yes; Standard/climate | |
| ● Input resistance (Pt 100) | 10 MΩ | |
| ● Pt 1000 | Yes; Standard/climate | |
| ● Input resistance (Pt 1000) | 10 MΩ | |
| ● Pt 200 | Yes; Standard/climate | |
| ● Input resistance (Pt 200) | 10 MΩ | |
| ● Pt 500 | Yes; Standard/climate | |
| ● Input resistance (Pt 500) | 10 MΩ | |
| Input ranges (rated values), resistors | ||
| ● 0 to 150 ohms | Yes | |
| ● Input resistance (0 to 150 ohms) | 10 MΩ | |
| ● 0 to 300 ohms | Yes | |
| ● Input resistance (0 to 300 ohms) | 10 MΩ | |
| ● 0 to 600 ohms | Yes | |
| ● Input resistance (0 to 600 ohms) | 10 MΩ | |
| ● 0 to 6000 ohms | Yes | |
| ● Input resistance (0 to 6000 ohms) | 10 MΩ | |
| ● PTC | Yes | |
| ● Input resistance (PTC) | 10 MΩ | |
| Thermocouple (TC) | ||
| Temperature compensation | ||
| — external temperature compensation via RTD | Yes | |
| — Compensation for 0 °C reference point temperature | Yes; fixed value can be set | |
| Cable length | ||
| ● shielded, max. | 800 m; for U/I, 200 m for R/RTD, 50 m for TC | |
| Analog value generation for the inputs | ||
| Integration and conversion time/resolution per channel | ||
| ● Resolution with overrange (bit including sign), max. | 16 bit | |
| ● Integration time, parameterizable | Yes | |
| ● Integration time (ms) | 2,5 / 16,67 / 20 / 100 ms | |
| ● Basic conversion time, including integration time (ms) | 9 / 23 / 27 / 107 ms | |
| — additional conversion time for wire-break monitoring | 9 ms | |
| — additional conversion time for resistance measurement | 150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms | |
| ● Interference voltage suppression for interference frequency f1 in Hz | 400 / 60 / 50 / 10 Hz | |
| Smoothing of measured values | ||
| ● parameterizable | Yes | |
| ● Step: None | Yes | |
| ● Step: low | Yes | |
| ● Step: Medium | Yes | |
| ● Step: High | Yes | |
| Encoder | ||
| Connection of signal encoders | ||
| ● for voltage measurement | Yes | |
| ● for current measurement as 2-wire transducer | Yes | |
| — Burden of 2-wire transmitter, max. | 820 Ω | |
| ● for current measurement as 4-wire transducer | Yes | |
| ● for resistance measurement with two-wire connection | Yes; Only for PTC | |
| ● for resistance measurement with three-wire connection | Yes; All measuring ranges except PTC; internal compensation of the cable resistances | |
| ● for resistance measurement with four-wire connection | Yes; All measuring ranges except PTC | |
| Errors/accuracies | ||
| Linearity error (relative to input range), (+/-) | 0.02 % | |
| Temperature error (relative to input range), (+/-) | 0.005 %/K; with TC type T 0.02 +/- %/K | |
| Crosstalk between the inputs, max. | -80 dB | |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.02 % | |
| Temperature error of internal compensation | +/-6 °C | |
| Operational error limit in overall temperature range | ||
| ● Voltage, relative to input range, (+/-) | 0.3 % | |
| ● Current, relative to input range, (+/-) | 0.3 % | |
| ● Resistance, relative to input range, (+/-) | 0.3 % | |
| ● Resistance thermometer, relative to input range, (+/-) | Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K | |
| ● Thermocouple, relative to input range, (+/-) | Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K | |
| Basic error limit (operational limit at 25 °C) | ||
| ● Voltage, relative to input range, (+/-) | 0.1 % | |
| ● Current, relative to input range, (+/-) | 0.1 % | |
| ● Resistance, relative to input range, (+/-) | 0.1 % | |
| ● Resistance thermometer, relative to input range, (+/-) | Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K | |
| ● Thermocouple, relative to input range, (+/-) | Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K | |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | ||
| ● Series mode interference (peak value of interference < rated value of input range), min. | 40 dB | |
| ● Common mode voltage, max. | 10 V | |
| ● Common mode interference, min. | 60 dB | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | Yes | |
| Alarms | ||
| ● Diagnostic alarm | Yes | |
| ● Limit value alarm | Yes; two upper and two lower limit values in each case | |
| Diagnostic messages | ||
| ● Monitoring the supply voltage | Yes | |
| ● Wire-break | Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD | |
| ● Overflow/underflow | Yes | |
| Diagnostics indication LED | ||
| ● RUN LED | Yes; Green LED | |
| ● ERROR LED | Yes; Red LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; Green LED | |
| ● Channel status display | Yes; Green LED | |
| ● for channel diagnostics | Yes; Red LED | |
| ● for module diagnostics | Yes; Red LED | |
| Potential separation | ||
| Potential separation channels | ||
| ● between the channels | No | |
| ● between the channels, in groups of | 8 | |
| ● between the channels and backplane bus | Yes | |
| ● between the channels and the power supply of the electronics | Yes | |
| Permissible potential difference | ||
| between the inputs (UCM) | 20 V DC | |
| Between the inputs and MANA (UCM) | 10 V DC | |
| between M internally and the inputs | 75 V DC/60 V AC (base isolation) | |
| Isolation | ||
| Isolation tested with | 707 V DC (type test) | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● horizontal installation, min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● horizontal installation, max. | 70 °C; = Tmax; > +60 °C max. 2x ±20 mA or 4x ±10 V or 4x RTD permissible | |
| ● vertical installation, min. | -40 °C; = Tmin; Startup @ -25 °C | |
| ● vertical installation, max. | 50 °C; = Tmax | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Decentralized operation | ||
| Fast Startup supported | No | |
| Dimensions | ||
| Width | 35 mm | |
| Height | 147 mm | |
| Depth | 129 mm | |
| Weights | ||
| Weight, approx. | 310 g | |
| Other | ||
| Note: | Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 ohms ±0.02%; resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermocouple: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K | |
| last modified: | 02/01/2017 | |
