ÚvodÚvod
Úvod
  • O nás
    • Základní údaje o společnosti
    • Historie
    • Partnerství a certifikáty
    • Reference
  • Obory
    • Komplexní Automatizace
    • Výrobní Informatika
    • Integrační projekty a průmysl 4.0
    • Dodávky HW
    • Kurzy a školení
    • Servis 24/7
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
  • Hlavní menu
  • Úvod
    • Přihlášení
    • Registrace
    • Zaslat heslo
    Nákupní košík
  • ENG
www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-400/1500 > SIPLUS S7-400

6AG1410-5HX08-7AB0

Kód:
6AG1410-5HX08-7AB0
Skladem:

Technická data

Název:

SIPLUS PCS 7 CPU 410-5H

Popis:

SIPLUS PCS 7 CPU 410-5H -25 ... +70 DEGREES C WITH CONFORMAL COATUNG BASED ON 6ES7410-5HX08-0AB0 . CENTRAL UNIT FOR S7-400 AND S7-400H/F/FH, 5 INTERFACES: 1X PN, 1X DP, 2X FOR SYNC-MODULE AND 1X SERVICE . FOR SPARE PART USAGE ONLY; WITHOUT SYSTEM EXPANSION CARD

Technické informace:

SIPLUS PCS 7 CPU 410-5H -25 ... +70 DEGREES C WITH CONFORMAL COATUNG BASED ON 6ES7410-5HX08-0AB0 . CENTRAL UNIT FOR S7-400 AND S7-400H/F/FH, 5 INTERFACES: 1X PN, 1X DP, 2X FOR SYNC-MODULE AND 1X SERVICE . FOR SPARE PART USAGE ONLY; WITHOUT SYSTEM EXPANSION CARD
General information
Product type designation CPU 410-5H Process Automation
Hardware product version 1
Firmware version V8.1
Engineering with
● Programming package SIMATIC PCS 7 V8.1 or higher
CiR – Configuration in RUN
CiR synchronization time, basic load 60 ms
CiR synchronization time, time per I/O byte 0 µs
Input current
from backplane bus 5 V DC, typ. 2 A
from backplane bus 5 V DC, max. 2.4 A
from backplane bus 24 V DC, max. 150 mA; DP interface
from interface 5 V DC, max. 90 mA; At the DP interface
Power loss
Power loss, typ. 10 W
Memory
Work memory
● integrated 32 Mbyte
● integrated (for program) 16 Mbyte
● integrated (for data) 16 Mbyte
● expandable No
Load memory
● expandable FEPROM No
● integrated RAM, max. 48 Mbyte
● expandable RAM No
Backup
● present Yes
● with battery Yes; all data
● without battery No
Battery
Backup battery
● Backup current, typ. 370 µA; Valid up to 40°C
● Backup current, max. 2.1 mA
● Backup time, max. Dealt with in the module data manual with the secondary conditions and the factors of influence
● Feeding of external backup voltage to CPU No
CPU processing times
for bit operations, typ. 7.5 ns
for word operations, typ. 7.5 ns
for fixed point arithmetic, typ. 7.5 ns
for floating point arithmetic, typ. 15 ns
CPU speed 450 MHz; Multi-processor system
PCS 7 process objects 100 ... approx. 2 600, adjustable with system expansion card
average processing time of PCS 7 typicals 110 µs; with APL Typicals
Process tasks, max. 9; Individually adjustable from 10 ms to 5 s
CPU-blocks
DB
● Number, max. 16 000; Number range: 1 to 16 000 (= Instances)
● Size, max. 64 kbyte
FB
● Number, max. 8 000; Number range: 0 to 7999
● Size, max. 64 kbyte
FC
● Number, max. 8 000; Number range: 0 to 7999
● Size, max. 64 kbyte
OB
● Number, max. see instruction list
● Size, max. 64 kbyte
● Number of free cycle OBs 1; OB 1
● Number of time alarm OBs 8; OB 10-17
● Number of delay alarm OBs 4; OB 20-23
● Number of cyclic interrupt OBs 9; OB 30-38 (= Process Tasks)
● Number of process alarm OBs 8; OB 40-47
● Number of DPV1 alarm OBs 3; OB 55-57
● Number of startup OBs 2; OB 100, 102
● Number of asynchronous error OBs 9; OB 80-88
● Number of synchronous error OBs 2; OB 121, 122
Nesting depth
● per priority class 24
● additional within an error OB 2
Counters, timers and their retentivity
S7 counter
● Number 2 048
Retentivity
— adjustable Yes
Counting range
— lower limit 0
— upper limit 999
IEC counter
● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)
S7 times
● Number 2 048
Retentivity
— adjustable Yes
Time range
— lower limit 10 ms
— upper limit 9 990 s
IEC timer
● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total Total working and load memory (with backup battery)
Flag
● Number, max. 16 384 byte
● Retentivity available Yes
● Number of clock memories 8; in 1 memory byte
Data blocks
● Number, max. 16 000; Number range: 1 to 16000
● Size, max. 64 kbyte
Local data
● adjustable, max. 64 kbyte
● preset 64 kbyte
Address area
I/O address area
● Inputs 16 kbyte; up to 7500 IOs
● Outputs 16 kbyte; up to 7500 IOs
of which distributed
— DP interface, inputs 6 kbyte; up to 2 800 IOs (channels)
— DP interface, outputs 6 kbyte; up to 2 800 IOs (channels)
— PROFINET interface, inputs 8 kbyte; up to 3 800 IOs (channels)
— PROFINET interface, outputs 8 kbyte; up to 3 800 IOs (channels)
Process image
● Inputs, adjustable 16 kbyte
● Outputs, adjustable 16 kbyte
● Inputs, default 16 kbyte
● Outputs, default 16 kbyte
● consistent data, max. 244 byte
● Access to consistent data in process image Yes
Subprocess images
● Number of subprocess images, max. 15
Digital channels
● Inputs 131 072; max.
— of which central 131 072; max.
● Outputs 131 072; max.
— of which central 131 072; max.
● Number of addressable digital I/Os, max. 131 072
Analog channels
● Inputs 8 192; max.
— of which central 8 192; max.
● Outputs 8 192; max.
— of which central 8 192; max.
● Number of addressable analog I/Os, max. 8 192
Hardware configuration
Number of expansion units, max. 21; S7-400 expansion devices
connectable OPs 119
Multicomputing No
Interface modules
● Number of connectable IMs (total), max. 6
● Number of connectable IM 460s, max. 6
● Number of connectable IM 463s, max. 4; Single mode only
Number of DP masters
● integrated 1
● via CP 10; CP 443-5 Extended
Number of IO Controllers
● integrated 2
● via CP 0
Number of operable FMs and CPs (recommended)
● PROFIBUS and Ethernet CPs 11; Of which max. 10 CP as DP master
Slots
● required slots 2
Time of day
Clock
● Hardware clock (real-time) Yes
● retentive and synchronizable Yes
● Resolution 1 ms
● Deviation per day (buffered), max. 1.7 s; Power off
● Deviation per day (unbuffered), max. 8.6 s; Power on
Operating hours counter
● Number 16
● Number/Number range 0 to 15
● Range of values SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
● Granularity 1 hour
● retentive Yes
Clock synchronization
● supported Yes
● to DP, master Yes
● to DP, slave Yes
● in AS, master Yes
● in AS, slave Yes
● on Ethernet via NTP Yes; As client
Time difference in system when synchronizing via
● Ethernet, max. 10 ms
Interfaces
Number of PROFINET interfaces 2
Number of RS 485 interfaces 1; PROFIBUS DP
Number of other interfaces 2; 2x synchronization
1. Interface
Interface type Integrated
Physics RS 485 / PROFIBUS
Isolated Yes
Power supply to interface (15 to 30 V DC), max. 150 mA
Number of connection resources 16
Functionality
● PROFIBUS DP master Yes
● PROFIBUS DP slave No
DP master
● Number of connections, max. 16
● Transmission rate, max. 12 Mbit/s
● Number of DP slaves, max. 96
● Number of slots per interface, max. 1 632
Services
— PG/OP communication Yes
— Routing Yes
— Global data communication No
— S7 basic communication No
— S7 communication Yes
— S7 communication, as client Yes
— S7 communication, as server Yes
— Equidistance No
— Isochronous mode No
— SYNC/FREEZE No
— Activation/deactivation of DP slaves No
— Direct data exchange (slave-to-slave communication) No
— DPV1 Yes
Address area
— Inputs, max. 6 kbyte; up to 2 800 IOs (channels)
— Outputs, max. 6 kbyte; up to 2 800 IOs (channels)
User data per DP slave
— User data per DP slave, max. 244 byte
— Inputs, max. 244 byte
— Outputs, max. 244 byte
— Slots, max. 244
— per slot, max. 128 byte
2. Interface
Interface type PROFINET
Physics Ethernet RJ45
Isolated Yes
automatic detection of transmission rate Yes; Autosensing
Autonegotiation Yes
Autocrossing Yes
Change of IP address at runtime, supported No
Number of connection resources 120
Interface types
● Number of ports 2
● integrated switch Yes
Media redundancy
● supported Yes
● Switchover time on line break, typ. 200 ms
● Number of stations in the ring, max. 50
Functionality
● PROFINET IO Controller Yes
● PROFINET IO Device No
● PROFINET CBA No
● Open IE communication Yes
● Web server No
PROFINET IO Controller
● Transmission rate, max. 100 Mbit/s
Services
— PG/OP communication Yes
— S7 routing Yes
— S7 communication Yes
— Open IE communication Yes
— Shared device No; however, usable as part of S7
— Prioritized startup No
— Number of connectable IO Devices, max. 250
— Number of connectable IO Devices for RT, max. 250
— of which in line, max. 250
— Activation/deactivation of IO Devices No
— IO Devices changing during operation (partner ports), supported No
— Device replacement without swap medium Yes
— Send cycles 250 µs, 500 µs, 1 ms, 2 ms, 4 ms
— Updating time 250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode
Address area
— User data consistency, max. 1 024 byte
Open IE communication
● Number of connections, max. 118
● Local port numbers used at the system end 0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
● Keep-alive function, supported Yes
3. Interface
Interface type PROFINET
Physics Ethernet RJ45
Isolated Yes
automatic detection of transmission rate Yes; Autosensing
Autonegotiation Yes
Autocrossing Yes
Number of connection resources 120
Interface types
● Number of ports 2
● integrated switch Yes
Functionality
● PROFINET IO Controller Yes
● PROFINET IO Device No
● PROFINET CBA No
● Open IE communication Yes
● Web server No
PROFINET IO Controller
● Transmission rate, max. 100 Mbit/s
Services
— PG/OP communication Yes
— S7 routing Yes
— S7 communication Yes
— Open IE communication Yes
— Shared device No; however, usable as part of S7
— Prioritized startup No
— Number of connectable IO Devices, max. 250
— Number of connectable IO Devices for RT, max. 250
— of which in line, max. 250
— Activation/deactivation of IO Devices No
— IO Devices changing during operation (partner ports), supported No
— Device replacement without swap medium Yes
— Send cycles 250 µs, 500 µs, 1 ms, 2 ms, 4 ms
— Updating time 250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode
Address area
— User data consistency, max. 1 024 byte
Open IE communication
● Number of connections, max. 118
● Local port numbers used at the system end 0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
● Keep-alive function, supported Yes
4. Interface
Interface type Pluggable synchronization submodule (FO)
Plug-in interface modules Synchronization modules 6AG1960-1AA06-7XA0 or 6AG1960-1AB06-7XA0
5. Interface
Interface type Pluggable synchronization submodule (FO)
Plug-in interface modules Synchronization modules 6AG1960-1AA06-7XA0 or 6AG1960-1AB06-7XA0
Protocols
Supports protocol for PROFINET IO Yes
PROFINET CBA No
PROFIsafe Yes
PROFIBUS Yes
AS-Interface Yes; Via add-on
Protocols (Ethernet)
● TCP/IP Yes
Further protocols
● Foundation Fieldbus Yes; via DP/FF Link
● MODBUS Yes; Via add-on
Communication functions
PG/OP communication Yes
● Number of connectable OPs without message processing 119
● Number of connectable OPs with message processing 119; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing Yes
S7 routing Yes
S7 communication
● supported Yes
● as server Yes
● as client Yes
● User data per job, max. 64 kbyte
● User data per job (of which consistent), max. 462 byte; 1 variable
S5 compatible communication
● supported Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)
● User data per job, max. 8 kbyte
● User data per job (of which consistent), max. 240 byte
● Number of simultaneous AG-SEND/AG-RECV orders per CPU, max. 64/64
Standard communication (FMS)
● supported Yes; Via CP and loadable FB
Open IE communication
● TCP/IP Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max. 118
— Data length, max. 32 kbyte
— several passive connections per port, supported Yes
● ISO-on-TCP (RFC1006) Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
— Number of connections, max. 118
— Data length, max. 32 kbyte; 1452 bytes via CP 443-1 Adv.
● UDP Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max. 118
— Data length, max. 1 472 byte
Number of connections
● overall 120
● usable for PG communication
— reserved for PG communication 1
● usable for OP communication
— reserved for OP communication 1
S7 message functions
Number of login stations for message functions, max. 119; Max. 119 with Alarm_S and Alarm_D (OPs); max. 12 with Alarm_8 and Alarm_P (e.g. WinCC)
Symbol-related messages No
SCAN procedure No
Block related messages Yes
Process diagnostic messages Yes
simultaneously active Alarm-S blocks, max. 1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks Yes
● Number of instances for alarm 8 and S7 communication blocks, max. 10 000
● preset, max. 10 000
Process control messages Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND) 64
Test commissioning functions
Status block Yes
Single step Yes
Number of breakpoints 4
Status/control
● Status/control variable Yes
● Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max. 70
Diagnostic buffer
● present Yes
Service data
● can be read out Yes
EMC
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas Yes
● Limit class B, for use in residential areas No
Standards, approvals, certificates
CE mark Yes
Ambient conditions
Ambient temperature during operation
● min. -25 °C; = Tmin
● max. 70 °C; = Tmax
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m). For "F-Systems" applications max. +2 000 m above sea level permissible
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3 Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3 Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Configuration
Programming
● Command set see instruction list
● Nesting levels 7
● Access to consistent data in process image Yes
● System functions (SFC) see instruction list
● System function blocks (SFB) see instruction list
Programming language
— LAD Yes
— FBD Yes
— STL Yes
— SCL Yes
— CFC Yes
— GRAPH Yes
— HiGraph® Yes
Number of simultaneously active SFCs
— RD_REC 8
— WR_REC 8
— WR_PARM 8
— PARM_MOD 1
— WR_DPARM 2
— DPNRM_DG 8
— RDSYSST 8
— DP_TOPOL 1
Number of simultaneously active SFBs
— RDREC 8
— WRREC 8
Know-how protection
● User program protection/password protection Yes
● Block encryption Yes; With S7 block Privacy
Dimensions
Width 50 mm
Height 290 mm
Depth 219 mm
Weights
Weight, approx. 1.1 kg
last modified: 02/03/2017
Poslat tip známému

Vyplněním tohoto formuláře můžete dát vědět svému známému o tomto výrobku.

Ochrana osobních údajů
Kde jste: www.sidat.cz > E-shop > Nízkonapěťová spínací technika > Siplus > SIPLUS Extreme S7-400/1500 > SIPLUS S7-400
MENU
Úvod

Facebook LinkeIn

  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop

SIDAT, spol. s r. o., Jinonická 80, 158 00 Praha  | Staré náměstí 9/8, 619 00 Brno

info@sidat.cz | www.sidat.cz | Ochrana osobních údajů | Cookies

2021 ©  SIDAT automation & informatics, Všechna práva vyhrazena
Provozováno na m@gnetpro
  • O nás
  • Obory
  • Ke stažení
  • Kontakty
  • Kariéra
  • Školení
  • E-shop
    • Automatizační systémy
    • Nízkonapěťová spínací technika
      • Motorové jističe; stykače a kombinace; relé - jistící, časová, vyhodnocovací
      • Elektronické/komunikaci podporující spínací přístroje
      • Transformátory, zdroje, tlumivky
      • Siplus
        • SIPLUS Extreme LOGO
        • SIPLUS Extreme ostatní
        • SIPLUS Extreme S7-200/1200
        • SIPLUS Extreme S7-300
        • SIPLUS Extreme S7-400/1500
          • SIPLUS S7-400
          • SIPLUS S7-1500
        • SIPLUS HCS
        • SIPLUS RIC
        • SIPLUS CMS / HCS / ECC
        • SIPLUS SIDOOR
        • SIPLUS Customized Products
      • Vypínače, odpínače a výkonové jističe
      • Průmyslové rozváděče, skříně, přípojnicové systémy
      • Jističe vedení, Proud. chrániče a kombi přístroje, Pojistky
      • Vypínače a zásuvky, modulové přístroje
      • Rozvodnice, rozváděče, řadové svornice
    • Regulované pohony
    • Motory
    • Procesní instrumentace a analyzátory, průmyslové senzory
    • Mechanické pohony
    • Ostatní produkty
    • Zboží skladem (dodání ihned)
Zavřít okno

Vážený zákazníku,

děkujeme za Váš zájem o naše služby, ale tato verze e-shopu není podporována, aktuálně je vyvíjena nová, do níž zatím není možné se registrovat. Registrace provedená zde je automaticky reportována obchodnímu oddělení, které Vaše kontakty vnáší do systému a tudíž na Vaše podněty bude neprodleně reagovat. Pro zjištění disponibility a ceny komponent zde uvedených (i neuvedených) Vám však doporučujeme dočasně kontaktovat obchodní oddělení prostřednictvím e-mailu (obchod@sidat.cz) či telefonicky (tel. 257 187 920), rádi se budeme Vašemu požadavku individuálně věnovat.

Omlouváme se za případné komplikace, děkujeme za pochopení a těšíme se na další spolupráci!

Váš tým SIDAT.