Technická data
Název:
SIPLUS S7-400 CPU 414-5H
Popis:
SIPLUS S7-400 CPU 414-5H -25 ... + 70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7414-5HM06-0AB0 . CENTRAL UNIT FOR S7-400H AND S7-400F/FH, 5 INTERFACES: 1X MPI/DP, 1X DP, 1X PN AND 2 FOR SYNC MODULES 4 MB MEMORY (512 KB DATA/512 KB CODE)
Technické informace:
| General information | ||
| Product type designation | CPU 414-5H PN/DP | |
| Hardware product version | 1 | |
| Firmware version | V6.0 | |
| Engineering with | ||
| ● Programming package | As of STEP 7 V5.5 SP2 with HF1 | |
| CiR – Configuration in RUN | ||
| CiR synchronization time, basic load | 100 ms | |
| CiR synchronization time, time per I/O byte | 0 µs | |
| Supply voltage | ||
| Rated value (DC) | ||
| ● 24 V DC | No; Power supply via system power supply | |
| Input current | ||
| from backplane bus 5 V DC, typ. | 1.6 A | |
| from backplane bus 5 V DC, max. | 1.9 A | |
| from backplane bus 24 V DC, max. | 150 mA; 150 mA per DP interface | |
| from interface 5 V DC, max. | 90 mA; At each DP interface | |
| Power loss | ||
| Power loss, typ. | 7.5 W | |
| Memory | ||
| Type of memory | RAM | |
| Work memory | ||
| ● integrated | 4 Mbyte | |
| ● integrated (for program) | 2 Mbyte | |
| ● integrated (for data) | 2 Mbyte | |
| ● expandable | No | |
| Load memory | ||
| ● expandable FEPROM | Yes; with Memory Card (FLASH) | |
| ● expandable FEPROM, max. | 64 Mbyte | |
| ● integrated RAM, max. | 512 kbyte | |
| ● expandable RAM | Yes | |
| ● expandable RAM, max. | 64 Mbyte | |
| Backup | ||
| ● present | Yes | |
| ● with battery | Yes; all data | |
| ● without battery | No | |
| Battery | ||
| Backup battery | ||
| ● Backup current, typ. | 180 µA; Valid up to 40°C | |
| ● Backup current, max. | 1 000 µA | |
| ● Backup time, max. | Dealt with in the module data manual with the secondary conditions and the factors of influence | |
| ● Feeding of external backup voltage to CPU | 5 V DC to 15 V DC | |
| CPU processing times | ||
| for bit operations, typ. | 18.75 ns | |
| for word operations, typ. | 18.75 ns | |
| for fixed point arithmetic, typ. | 18.75 ns | |
| for floating point arithmetic, typ. | 37.5 ns | |
| CPU-blocks | ||
| DB | ||
| ● Number, max. | 6 000; Number range: 1 to 16000 | |
| ● Size, max. | 64 kbyte | |
| FB | ||
| ● Number, max. | 3 000; Number range: 0 to 7999 | |
| ● Size, max. | 64 kbyte | |
| FC | ||
| ● Number, max. | 3 000; Number range: 0 to 7999 | |
| ● Size, max. | 64 kbyte | |
| OB | ||
| ● Number, max. | see instruction list | |
| ● Size, max. | 64 kbyte | |
| ● Number of free cycle OBs | 1; OB 1 | |
| ● Number of time alarm OBs | 4; OB 10-13 | |
| ● Number of delay alarm OBs | 4; OB 20-23 | |
| ● Number of cyclic interrupt OBs | 4; OB 32-35 | |
| ● Number of process alarm OBs | 4; OB 40-43 | |
| ● Number of DPV1 alarm OBs | 3; OB 55-57 | |
| ● Number of startup OBs | 2; OB 100, 102 | |
| ● Number of asynchronous error OBs | 9; OB 80-88 | |
| ● Number of synchronous error OBs | 2; OB 121, 122 | |
| Nesting depth | ||
| ● per priority class | 24 | |
| ● additional within an error OB | 1 | |
| Counters, timers and their retentivity | ||
| S7 counter | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| — lower limit | 0 | |
| — upper limit | 2 047 | |
| — preset | Z 0 to Z 7 | |
| Counting range | ||
| — lower limit | 0 | |
| — upper limit | 999 | |
| IEC counter | ||
| ● present | Yes | |
| ● Type | SFB | |
| ● Number | Unlimited (limited only by RAM capacity) | |
| S7 times | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| — lower limit | 0 | |
| — upper limit | 2 047 | |
| — preset | No times retentive | |
| Time range | ||
| — lower limit | 10 ms | |
| — upper limit | 9 990 s | |
| IEC timer | ||
| ● present | Yes | |
| ● Type | SFB | |
| ● Number | Unlimited (limited only by RAM capacity) | |
| Data areas and their retentivity | ||
| retentive data area in total | Total working and load memory (with backup battery) | |
| Flag | ||
| ● Number, max. | 8 192 byte | |
| ● Retentivity available | Yes | |
| ● Retentivity preset | MB 0 to MB 15 | |
| ● Number of clock memories | 8; in 1 memory byte | |
| Data blocks | ||
| ● Number, max. | 6 000; Number range: 1 to 16000 | |
| ● Size, max. | 64 kbyte | |
| Local data | ||
| ● adjustable, max. | 16 kbyte | |
| ● preset | 8 kbyte | |
| Address area | ||
| I/O address area | ||
| ● Inputs | 8 kbyte | |
| ● Outputs | 8 kbyte | |
| of which distributed | ||
| — MPI/DP interface, inputs | 2 kbyte | |
| — MPI/DP interface, outputs | 2 kbyte | |
| — DP interface, inputs | 6 kbyte | |
| — DP interface, outputs | 6 kbyte | |
| — PROFINET interface, inputs | 8 kbyte | |
| — PROFINET interface, outputs | 8 kbyte | |
| Process image | ||
| ● Inputs, adjustable | 8 kbyte | |
| ● Outputs, adjustable | 8 kbyte | |
| ● Inputs, default | 256 byte | |
| ● Outputs, default | 256 byte | |
| ● consistent data, max. | 244 byte | |
| ● Access to consistent data in process image | Yes | |
| Subprocess images | ||
| ● Number of subprocess images, max. | 15 | |
| Digital channels | ||
| ● Inputs | 65 536 | |
| — of which central | 65 536 | |
| ● Outputs | 65 536 | |
| — of which central | 65 536 | |
| Analog channels | ||
| ● Inputs | 4 096 | |
| — of which central | 4 096 | |
| ● Outputs | 4 096 | |
| — of which central | 4 096 | |
| Hardware configuration | ||
| Number of expansion units, max. | 21 | |
| connectable OPs | 63 | |
| Multicomputing | No | |
| Interface modules | ||
| ● Number of connectable IMs (total), max. | 6 | |
| ● Number of connectable IM 460s, max. | 6 | |
| ● Number of connectable IM 463s, max. | 4; Single mode only | |
| Number of DP masters | ||
| ● integrated | 2 | |
| ● via CP | 10; CP 443-5 Extended | |
| ● Mixed mode IM + CP permitted | No | |
| ● via interface module | 0 | |
| Number of IO Controllers | ||
| ● integrated | 1 | |
| ● via CP | 0 | |
| Number of operable FMs and CPs (recommended) | ||
| ● FM | See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections | |
| ● CP, PtP | See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections | |
| ● PROFIBUS and Ethernet CPs | 14; Of which max. 10 CP as DP master | |
| Slots | ||
| ● required slots | 2 | |
| Time of day | ||
| Clock | ||
| ● Hardware clock (real-time) | Yes | |
| ● retentive and synchronizable | Yes | |
| ● Resolution | 1 ms | |
| ● Deviation per day (buffered), max. | 1.7 s; Power off | |
| ● Deviation per day (unbuffered), max. | 8.6 s; Power on | |
| Operating hours counter | ||
| ● Number | 16 | |
| ● Number/Number range | 0 to 15 | |
| ● Range of values | SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours | |
| ● Granularity | 1 hour | |
| ● retentive | Yes | |
| Clock synchronization | ||
| ● supported | Yes | |
| ● to MPI, master | Yes | |
| ● to MPI, slave | Yes | |
| ● to DP, master | Yes | |
| ● to DP, slave | Yes | |
| ● in AS, master | Yes | |
| ● in AS, slave | Yes | |
| ● on Ethernet via NTP | Yes; As client | |
| Time difference in system when synchronizing via | ||
| ● Ethernet, max. | 10 ms; Via NTP | |
| ● MPI, max. | 200 ms | |
| Interfaces | ||
| Number of RS 485 interfaces | 2 | |
| Number of other interfaces | 2; Fiber-optic interface | |
| 1. Interface | ||
| Interface type | Integrated | |
| Physics | RS 485 / PROFIBUS + MPI | |
| Isolated | Yes | |
| Power supply to interface (15 to 30 V DC), max. | 150 mA | |
| Number of connection resources | MPI: 32, DP: 16 | |
| Functionality | ||
| ● MPI | Yes | |
| ● PROFIBUS DP master | Yes | |
| ● PROFIBUS DP slave | No | |
| MPI | ||
| ● Number of connections | 32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 | |
| ● Transmission rate, max. | 12 Mbit/s | |
| Services | ||
| — PG/OP communication | Yes | |
| — Routing | Yes | |
| — Global data communication | No | |
| — S7 basic communication | No | |
| — S7 communication | Yes | |
| — S7 communication, as client | Yes | |
| — S7 communication, as server | Yes | |
| DP master | ||
| ● Number of connections, max. | 16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 | |
| ● Transmission rate, max. | 12 Mbit/s | |
| ● Number of DP slaves, max. | 32 | |
| Services | ||
| — PG/OP communication | Yes | |
| — Routing | Yes | |
| — Global data communication | No | |
| — S7 basic communication | No | |
| — S7 communication | Yes | |
| — S7 communication, as client | Yes | |
| — S7 communication, as server | Yes | |
| — Equidistance | No | |
| — Isochronous mode | No | |
| — SYNC/FREEZE | No | |
| — Activation/deactivation of DP slaves | No | |
| — Direct data exchange (slave-to-slave communication) | No | |
| — DPV1 | Yes | |
| Address area | ||
| — Inputs, max. | 2 kbyte | |
| — Outputs, max. | 2 kbyte | |
| User data per DP slave | ||
| — User data per DP slave, max. | 244 byte | |
| — Inputs, max. | 244 byte | |
| — Outputs, max. | 244 byte | |
| — Slots, max. | 244 | |
| — per slot, max. | 128 byte | |
| DP slave | ||
| ● Number of connections | No configuration of CPU as DP slave | |
| 2. Interface | ||
| Interface type | PROFINET | |
| Physics | Ethernet RJ45 | |
| Isolated | Yes | |
| automatic detection of transmission rate | Yes; Autosensing | |
| Autonegotiation | Yes | |
| Autocrossing | Yes | |
| Change of IP address at runtime, supported | No | |
| Number of connection resources | 64 | |
| Interface types | ||
| ● Number of ports | 2 | |
| ● integrated switch | Yes | |
| Media redundancy | ||
| ● supported | Yes | |
| ● Switchover time on line break, typ. | 200 ms | |
| ● Number of stations in the ring, max. | 50 | |
| Functionality | ||
| ● PROFINET IO Controller | Yes | |
| ● PROFINET IO Device | No | |
| ● PROFINET CBA | No | |
| ● PROFIBUS DP master | No | |
| ● PROFIBUS DP slave | No | |
| ● Open IE communication | Yes | |
| ● Web server | No | |
| ● Point-to-point connection | No | |
| PROFINET IO Controller | ||
| ● Transmission rate, max. | 100 Mbit/s | |
| Services | ||
| — PG/OP communication | Yes | |
| — S7 routing | Yes | |
| — S7 communication | Yes | |
| — Isochronous mode | No | |
| — Open IE communication | Yes | |
| — Shared device | Yes; Single mode only | |
| — Prioritized startup | No | |
| — Number of connectable IO Devices, max. | 256; In redundant mode via both interfaces | |
| — Number of connectable IO Devices for RT, max. | 256 | |
| — of which in line, max. | 256 | |
| — Activation/deactivation of IO Devices | No | |
| — IO Devices changing during operation (partner ports), supported | No | |
| — Device replacement without swap medium | Yes | |
| — Send cycles | 250 µs, 500 µs, 1 ms, 2 ms, 4 ms | |
| — Updating time | 250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode | |
| Address area | ||
| — User data consistency, max. | 1 024 byte | |
| Open IE communication | ||
| ● Number of connections, max. | 62 | |
| ● Local port numbers used at the system end | 0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535 | |
| ● Keep-alive function, supported | Yes | |
| 3. Interface | ||
| Interface type | Integrated | |
| Physics | RS 485 / PROFIBUS | |
| Power supply to interface (15 to 30 V DC), max. | 150 mA | |
| Number of connection resources | 16 | |
| Functionality | ||
| ● PROFIBUS DP master | Yes | |
| ● PROFIBUS DP slave | No | |
| DP master | ||
| ● Number of connections, max. | 16 | |
| ● Transmission rate, max. | 12 Mbit/s | |
| ● Number of DP slaves, max. | 96 | |
| Services | ||
| — PG/OP communication | Yes | |
| — Routing | Yes | |
| — Global data communication | No | |
| — S7 basic communication | No | |
| — S7 communication | Yes | |
| — S7 communication, as client | Yes | |
| — S7 communication, as server | Yes | |
| — Equidistance | No | |
| — Isochronous mode | No | |
| — SYNC/FREEZE | No | |
| — Activation/deactivation of DP slaves | No | |
| — Direct data exchange (slave-to-slave communication) | No | |
| — DPV0 | Yes | |
| — DPV1 | Yes | |
| Address area | ||
| — Inputs, max. | 6 kbyte | |
| — Outputs, max. | 6 kbyte | |
| User data per DP slave | ||
| — User data per DP slave, max. | 244 byte | |
| — Inputs, max. | 244 byte | |
| — Outputs, max. | 244 byte | |
| — Slots, max. | 244 | |
| — per slot, max. | 128 byte | |
| 4. Interface | ||
| Interface type | Pluggable synchronization submodule (FO) | |
| Plug-in interface modules | Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0 | |
| 5. Interface | ||
| Interface type | Pluggable synchronization submodule (FO) | |
| Plug-in interface modules | Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0 | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Equidistance | No | |
| Communication functions | ||
| PG/OP communication | Yes | |
| ● Number of connectable OPs without message processing | 63 | |
| ● Number of connectable OPs with message processing | 63; When using Alarm_S/SQ and Alarm_D/DQ | |
| Data record routing | Yes | |
| S7 routing | Yes | |
| Global data communication | ||
| ● supported | No | |
| S7 basic communication | ||
| ● supported | No | |
| S7 communication | ||
| ● supported | Yes | |
| ● as server | Yes | |
| ● as client | Yes | |
| ● User data per job, max. | 64 kbyte | |
| ● User data per job (of which consistent), max. | 462 byte; 1 variable | |
| S5 compatible communication | ||
| ● supported | Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV) | |
| ● User data per job, max. | 8 kbyte | |
| ● User data per job (of which consistent), max. | 240 byte | |
| ● Number of simultaneous AG-SEND/AG-RECV orders per CPU, max. | 64/64 | |
| Standard communication (FMS) | ||
| ● supported | Yes; Via CP and loadable FB | |
| Open IE communication | ||
| ● TCP/IP | Yes; via integrated PROFINET interface and loadable FBs | |
| — Number of connections, max. | 62 | |
| — Data length, max. | 32 kbyte | |
| — several passive connections per port, supported | Yes | |
| ● ISO-on-TCP (RFC1006) | Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs | |
| — Number of connections, max. | 62 | |
| — Data length, max. | 32 kbyte; 1452 bytes via CP 443-1 Adv. | |
| ● UDP | Yes; via integrated PROFINET interface and loadable FBs | |
| — Number of connections, max. | 62 | |
| — Data length, max. | 1 472 byte | |
| Web server | ||
| ● supported | No | |
| Number of connections | ||
| ● overall | 64 | |
| ● usable for PG communication | ||
| — reserved for PG communication | 1 | |
| — adjustable for PG communication, max. | 0 | |
| ● usable for OP communication | ||
| — reserved for OP communication | 1 | |
| — adjustable for OP communication, max. | 0 | |
| ● usable for S7 basic communication | ||
| — reserved for S7 basic communication | 0 | |
| — adjustable for S7 basic communication, max. | 0 | |
| ● usable for S7 communication | ||
| — reserved for S7 communication | 0 | |
| — adjustable for S7 communication, max. | 0 | |
| ● usable for routing | ||
| — reserved for routing | 0 | |
| — adjustable for routing, max. | 0 | |
| S7 message functions | ||
| Number of login stations for message functions, max. | 63; Max. 63 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC) | |
| Symbol-related messages | No | |
| SCAN procedure | No | |
| Block related messages | Yes | |
| Process diagnostic messages | Yes | |
| simultaneously active Alarm-S blocks, max. | 400; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks | |
| Alarm 8-blocks | Yes | |
| ● Number of instances for alarm 8 and S7 communication blocks, max. | 2 500 | |
| ● preset, max. | 900 | |
| Process control messages | Yes | |
| Number of archives that can log on simultaneously (SFB 37 AR_SEND) | 16 | |
| Test commissioning functions | ||
| Status block | Yes | |
| Single step | Yes | |
| Number of breakpoints | 16 | |
| Status/control | ||
| ● Status/control variable | Yes; Up to 16 variable tables | |
| ● Variables | Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters | |
| ● Number of variables, max. | 70 | |
| Forcing | ||
| ● Forcing | Yes | |
| ● Forcing, variables | Inputs/outputs, bit memories, distributed I/Os | |
| ● Number of variables, max. | 256 | |
| Diagnostic buffer | ||
| ● present | Yes | |
| ● Number of entries, max. | 3 200 | |
| — adjustable | Yes | |
| — preset | 120 | |
| Service data | ||
| ● can be read out | Yes | |
| EMC | ||
| Emission of radio interference acc. to EN 55 011 | ||
| ● Limit class A, for use in industrial areas | Yes | |
| ● Limit class B, for use in residential areas | No | |
| Standards, approvals, certificates | ||
| CE mark | Yes | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -25 °C; = Tmin | |
| ● max. | 70 °C; = Tmax; @ 60°C for UL/ATEX/FM and safety-related application | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m). For "F-Systems" applications max. +2 000 m above sea level permissible | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Configuration | ||
| Configuration software | ||
| ● STEP 7 | Yes | |
| Programming | ||
| ● Command set | see instruction list | |
| ● Nesting levels | 7 | |
| ● Access to consistent data in process image | Yes | |
| ● System functions (SFC) | see instruction list | |
| ● System function blocks (SFB) | see instruction list | |
| Programming language | ||
| — LAD | Yes | |
| — FBD | Yes | |
| — STL | Yes | |
| — SCL | Yes | |
| — CFC | Yes | |
| — GRAPH | Yes | |
| — HiGraph® | Yes | |
| Number of simultaneously active SFCs | ||
| — RD_REC | 8 | |
| — WR_REC | 8 | |
| — WR_PARM | 8 | |
| — PARM_MOD | 1 | |
| — WR_DPARM | 2 | |
| — DPNRM_DG | 8 | |
| — RDSYSST | 8 | |
| — DP_TOPOL | 1 | |
| Number of simultaneously active SFBs | ||
| — RDREC | 8 | |
| — WRREC | 8 | |
| Know-how protection | ||
| ● User program protection/password protection | Yes | |
| ● Block encryption | Yes; With S7 block Privacy | |
| Dimensions | ||
| Width | 50 mm | |
| Height | 290 mm | |
| Depth | 219 mm | |
| Weights | ||
| Weight, approx. | 995 g | |
| last modified: | 02/01/2017 | |
