Technická data
Název:
SIPLUS S7-400 PS407 10A
Popis:
SIPLUS S7-400 PS407 10A -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7407-0KA02-0AA0 . 10A, WIDERANGE, UC 120/230V; DC 5V/10A
Technické informace:
| Supply voltage | ||
| Rated value (DC) | ||
| ● 120 V DC | Yes | |
| ● 230 V DC | Yes | |
| permissible range, lower limit (DC) | 88 V | |
| permissible range, upper limit (DC) | 300 V | |
| Rated value (AC) | ||
| ● 120 V AC | Yes | |
| ● 230 V AC | Yes | |
| permissible range, lower limit (AC) | 85 V | |
| permissible range, upper limit (AC) | 264 V | |
| Line frequency | ||
| ● Rated value 50 Hz | Yes | |
| ● Rated value 60 Hz | Yes | |
| ● permissible range, lower limit | 47 Hz | |
| ● permissible range, upper limit | 63 Hz | |
| Mains buffering | ||
| ● Mains/voltage failure stored energy time | 20 ms | |
| ● Mains buffering according to NAMUR recommendation | Yes | |
| Input current | ||
| Rated value at 110 V DC | 1 A; at 120 V DC | |
| Rated value at 230 V DC | 0.5 A | |
| Rated value at 120 V AC | 0.9 A | |
| Rated value at 230 V AC | 0.5 A | |
| Inrush current, max. | 63 A; Full width at half maximum 1 ms | |
| Output voltage | ||
| Type of output voltage | DC | |
| Rated value (DC) | ||
| ● 5 V DC | Yes | |
| ● 24 V DC | Yes | |
| Output current | ||
| for backplane bus (5 V DC), max. | 10 A; no base load required | |
| for backplane bus (24 V DC), max. | 1 A; idling-proof | |
| Short-circuit protection | Yes | |
| Power | ||
| Active power input, typ. | 95 W | |
| Power loss | ||
| Power loss, typ. | 20 W | |
| Battery | ||
| Backup battery | ||
| ● Backup battery (optional) | Yes; 0 °C to +60 °C: 2 x lithium AA; 3.6 V/2.3 Ah // -25 °C to +70 °C and/or 100% RH: 2 x external battery box 6AG1971-0AA00-7AA0 and 2 x MONO cell design D | |
| Hardware configuration | ||
| Slots | ||
| ● required slots | 2 | |
| Potential separation | ||
| primary/secondary | Yes | |
| EMC | ||
| Compliance with line harmonic distortion limits | ||
| ● Compliance with line harmonic distortion acc. to IEC 61000-3-2, IEC 61000-3-3 | Yes | |
| Degree and class of protection | ||
| Protection class | 1; with protective conductor | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | -25 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode | |
| ● max. | 70 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode | |
| Extended ambient conditions | ||
| ● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
| Relative humidity | ||
| — With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost (no commissioning if there is condensation). In buffer mode, use battery box SIPLUS 6AG1971-0AA00-7AA0 for high humidity | |
| Resistance | ||
| — against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| — against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
| Connection method | ||
| Connecting cables/cross-sections | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | |
| Dimensions | ||
| Width | 50 mm | |
| Height | 290 mm | |
| Depth | 217 mm | |
| Weights | ||
| Weight, approx. | 1 200 g | |
| last modified: | 02/01/2017 | |
