Technická data
Název:
SIPLUS S7-400 PS405 10A
Popis:
SIPLUS S7-400 PS 405 10A -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7405-0KA02-0AA0 . POWER SUPPLY, WIDE RANGE 10A, 24/48/60V DC, 5V/10A DC
Technické informace:
General information | ||
Product type designation | PS405, 24/48/60 VDC, 5 VDC/10 A | |
Supply voltage | ||
Rated value (DC) | ||
● 24 V DC | Yes | |
● 48 V DC | Yes | |
● 60 V DC | Yes | |
permissible range, lower limit (DC) | 19.2 V; Dynamic 18.5 V | |
permissible range, upper limit (DC) | 72 V; dynamic 75.5 V | |
Mains buffering | ||
● Mains/voltage failure stored energy time | 20 ms | |
● Mains buffering according to NAMUR recommendation | Yes | |
Input current | ||
Rated value at 24 V DC | 4 A | |
Rated value at 48 V DC | 2 A | |
Rated value at 60 V DC | 1.6 A | |
Inrush current, max. | 18 A; Full width at half maximum 20 ms | |
Output voltage | ||
Type of output voltage | DC | |
Rated value (DC) | ||
● 5 V DC | Yes | |
● 24 V DC | Yes | |
Output current | ||
for backplane bus (5 V DC), max. | 10 A; 7A @ > 60 °C, no base load necessary | |
for backplane bus (24 V DC), max. | 1 A; idling-proof | |
Short-circuit protection | Yes | |
Power | ||
Active power input, typ. | 95 W | |
Power loss | ||
Power loss, typ. | 20 W | |
Battery | ||
Backup battery | ||
● Backup battery (optional) | Yes; 2x lithium AA; 3.6 V / 2.3 Ah | |
Hardware configuration | ||
Slots | ||
● required slots | 2 | |
Potential separation | ||
primary/secondary | Yes | |
Degree and class of protection | ||
Protection class | 1; with protective conductor | |
Ambient conditions | ||
Ambient temperature during operation | ||
● min. | -25 °C; = Tmin | |
● max. | 70 °C; = Tmax | |
Extended ambient conditions | ||
● relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | |
Relative humidity | ||
— With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | |
Resistance | ||
— against biologically active substances / conformity with EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation in corrosive atmospheres! | |
— against chemically active substances / conformity with EN 60721-3-3 | Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
— against mechanically active substances / conformity with EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Connection method | ||
Connecting cables/cross-sections | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | |
Dimensions | ||
Width | 50 mm | |
Height | 290 mm | |
Depth | 217 mm | |
Weights | ||
Weight, approx. | 1.2 kg | |
last modified: | 02/01/2017 |